Jailbreak iPhone, iPod Touch, iPad

iH8Sn0w released Sn0wBreeze 2.9.10 that brings support for untethered jailbreak of iOS 6.1.2. New version supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock. It can also be used to upgrade iPhone 3GS modem version to 06.15.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

Our step-by-step tutorials:

• iPhone 4
• iPhone 3GS

What is New?

The Evad3rs have released Evasi0n 1.4, an update to the jailbreak utility that brings support for the new iOS 6.1.2 firmware. All devices are supported.

Version 1.4
● Added support for iOS 6.1.2, all devices.

You can download Evasi0n 1.4 here.

If you haven’t jailbroken yet, you can find the our step-by-step tutorials here:

• Windows
• Mac OS X

Apple has released iOS 6.1.2 to fix a bug with Microsoft Exchange Calendar.

Fixes an Exchange calendar bug that could result in increased network activity and reduced battery life.

Today’s update also fixes the passcode bug that was found last week. There is no information, whether this firmware is jailbreakable.

You can update via OTA or in iTunes. Jailbreakers have to perform restore to upgrade to iOS 6.1.2.

You can download the new firmware from here.

The Evad3rs have released Evasi0n 1.3, an update to the jailbreak utility that brings support for the new iOS 6.1.1 iPhone 4S firmware. Additionally, the team notes that OS X 10.5 should be fully supported now and the linux glibc requirement has been lowered to 2.3.

Version 1.3
● Support for 6.1.1 on the iPhone 4S.

You can download Evasi0n 1.3 here.

If you haven’t jailbroken yet, you can find the our step-by-step tutorials here:

• Windows
• Mac OS X

The Evad3rs Team have released an update to the Evasi0n jailbreak utility. Evasi0n 1.2 fixes timezone issue in evasi0n binary if client fails to correct it and disables OTA updates, which are not good for jailbroken devices.

If you’re already jailbroken – there is no need to rejailbreak, just run Cydia and install updates there. There is nothing in evasi0n 1.2 that is not already in Cydia.

You can download Evasi0n 1.2 here.

If you haven’t jailbroken yet, you can find the our step-by-step tutorials here:

• Windows
• Mac OS X

The Evad3rs Team have released an update to the Evasi0n jailbreak utility. Evasi0n 1.1 has fixes for a few bugs: one that caused the Weather app to crash, and another that caused longer reboot times.

If you’re already jailbroken – there is no need to rejailbreak, just run Cydia and install updates there. There is nothing in evasi0n 1.1 that is not already in Cydia.

You can download Evasi0n 1.1 here.

If you haven’t jailbroken yet, you can find the our step-by-step tutorials here:

• Windows
• Mac OS X

Apple has released iOS 6.1.1 beta to developers. It’s only been a week since Apple released iOS 6.1 to the public. And it’s just 48 hours after the iOS 6.x evasi0n jailbreak was released. Release notes indicate maps improvement and some other optimization. well, we understand that the main purpose of iOS 6.1.1 is probably to fix vulnerabilities used by envasi0n jailbreak.

MuscleNerd already commented via twitter:

6.1.1 beta is already out to developers! Obviously stay away from that.

Overview:
iOS 6.1.1 beta 1 includes the following improvements to Maps for Japan:
● Improved pronunciation of roads during turn-by-turn navigation
● Optimized directions to more strongly prefer highways over narrower roads
● Now indicates upcoming toll roads during turn-by-turn navigation
● Added labels for junctions, interchanges, on-ramps, off-ramps, and intersections
● Added indicators for transit station buildings, subway lines, and traffic lights
● Updated freeway color to green
● Updated icons for some location categories including fire stations, hospitals, and post offices
● Added 3D buildings including Tokyo Station, Japan Imperial Palace, and Tokyo Tower

Developers can download the update from the iOS Dev Center.

iH8Sn0w released Sn0wBreeze 2.9.7 that brings support for tethered jailbreak of iOS 6.0.1. New version supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

What is New?
● Added 6.0 (10A403)/6.0.1 (10A523) support. (Only includes iPhone 3GS & A4 devices).
● The 6.0/6.0.1 is currently a tethered based jailbreak via iBooty (except for iPhone 3GS old bootrom users).
● SAM is built-in for iOS 6 hacktivations. (Hacktivated phones can reboot to a semi-tethered state after being activated [rather than just hang at the Apple Logo]). Kudos @sbingner!

Downgrading:
● Use iFaith mode after selecting/downloading the appropriate IPSW for your device. You will then be prompted to browse for SHSH blobs for the IPSW you have selected.
● Remember to enter a PWNED DFU state with sn0wbreeze’s iREB button in the top bar of sn0wbreeze prior to (SHIFT + Restoring) the custom signed IPSW!

iREB & iOS 6:
Due to some changes in iOS 6, the current public standalone version of iREB will NOT enter a proper PWNED DFU state for restoring to custom iOS 6 IPSWs. An update for the standalone version should come sometime this week. In the meantime, use the iREB tab located in sn0wbreeze’s top status bar to enter a proper PWNED DFU state.

A5(X)/A6(X) Support?:
As stated many times in the past, sn0wbreeze cannot be updated to work on A5(X)/A6(X) devices until a low level exploit in DFU or iBoot is found and made public.

A5(X)/A6(X) Baseband Preservation/Hacktivation?
For those running A5(X)/A6(X) devices and need to preserve your baseband, there is nothing you can do at the moment. For those wanting to hacktivate, the only advice I can give is to buy the carrier’s SIM (the one its locked to obviously) on ebay. The SIM does not have to be active with the carrier to activate the phone.

Known Bugs/Issues:
● Windows 8 users currently need to use this workaround to run sn0wbreeze.
● iPad baseband will fail to flash on iOS 4.0 –> iOS 4.2.1 restores.
● iPod Touch 2G 4.x.x restores fail.

The iPhone Dev-Team has announced an updated version of RedSn0w and an upcoming update to UltraSn0w for iOS 6 compatibility.

Version 0.9.15b3 fixes the redsn0w “error 2601” that Windows users were seeing using the Restore button. It also fixes a related Windows iTunes error 14 for stitched files. Note that if you have a baseband, you should probably avoid stitching and simply use redsn0w’s native Restore (not iTunes).

Those lucky recipients of new iPad minis and iPad4s on Friday can use this redsn0w to save your 6.0 blobs off to Cydia. First connect your new device and turn it on, then use redsn0w’s Extras->SHSH Blobs->New and point it at the 6.0 IPSW.

Expect an ultrasn0w compatibility update for iOS 6.0 by Friday (mostly useful for 3GS old-bootrom users who are currently enjoying the untethered 6.0 jailbreak!). Same baseband support as with 5.x.

Thanks to @iamgolfy for helping test the 2601 Windows fix!

You can download the latest version of RedSn0w from here.

The iPhone Dev-Team has updated RedSn0w 0.9.15 with some bug fixes for iPhone 3GS and iPad owners.

Version 0.9.15b2 fixes a few issues for 3GS owners: old-bootrom awesomeness is no longer forgotten directly after a restore, and iPad baseband upgrade/downgrade support is fixed (same production date cutoffs apply!). If your 3GS is currently tethered at 6.0 even though you have an old bootrom, just re-run redsn0w’s Jailbreak step (no need to restore). Don’t forget you can add some pizzaz with your own boot logo or a nerdy verbose boot.

Redsn0w 0.9.15 brought gives us possibility to do iOS 6 jailbreak and different downgrade options.

You can download RedSn0w 0.9.15b2 here.