айпад | Jailbreak iPhone, iPod Touch, iPad Skip to content

Jailbreak iPhone, iPod Touch, iPad

новости про джейлбрейк iPhone, iPod Touch и iPad

Archive

Tag: айпад

redsn0w 0914b2 295x400 RedSn0w 0.9.14b2 improves 06.15 downgrade for iPhone 3GS/3G

The iPhone Dev-Team released RedSn0w 0.9.14b2 with improved algorithm for baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b2 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04. With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before). This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

The revised steps are:

  1. Connect your iPhone in normal mode, then click “Jailbreak” after redsn0w identifies its model and BB version (you needn’t pre-select the IPSW anymore).
  2. Choose the “Downgrade from iPad baseband” option (you needn’t worry about de-selecting Cydia anymore).
  3. Do a controlled “slide to power off” shutdown of your phone and proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step. THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running. Please just let it be for the next 3-8 minutes! When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners. The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

redsn0w 0914b1 313x400 RedSn0w 0.9.14b1 Released: 06.15 Downgrade for iPhone 3GS/3G

The iPhone Dev-Team released RedSn0w 0.9.14b1 that can perform a baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b1 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04.  With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before).  This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

Here are the steps:

  1. Use the “Extras->Select IPSW” button in redsn0w to tell it which firmware version you have installed (new-bootrom 3GS users can usually skip this step but it doesn’t hurt for them to do it too).
  2. Do a controlled shutdown of your iPhone (“slide to power off”).  This step is very important to avoid mount problems when the ramdisk is running!
  3. Go back to the first screen and click “Jailbreak”.  Enable the “Downgrade from iPad baseband” checkbox, disable Cydia if you already have it installed, and click Next to proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step.  THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running.  Please just let it be for the next 3-8 minutes!  When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners.  The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later.  If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone!  Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

jailbreak iOS 5.1.1 500x263 Tutorials for iOS 5.1.1 untethered jailbreak

Here are our step-by-step tutorials that will guide you through all the process of untether jailbreaking iOS 5.1.1 with absinthe, redsn0w and sn0wbreeze:

iphone4s Tutorials for iOS 5.1.1 untethered jailbreak iPhone 4S

UnTethered jailbreak iOS 5.1.1

iphone 4 s Tutorials for iOS 5.1.1 untethered jailbreak iPhone 4

UnTethered jailbreak iOS 5.1.1


Read the rest of this entry »

redsn0w 0912b2 main 325x400 RedSn0w 0.9.12b2: minor update and bugfixes

The iPhone Dev-Team has released RedSn0w 0.9.12b2. New version has some bugfixes and additional question about jailbreak mode for A4 devices.

Redsn0w allows owners of A4+earlier devices to install rocky-racoon two different ways:

  • Backup/restore method similar to Absinthe and cinject.
  • Traditional limera1n-based ramdisk install. It is much faster, especially for users with lot’s music, movies, apps on the device.

Redsn0w 0.9.12b2 will ask owners of iPhone 3GS, iPhone 4, iPod Touch 3G, iPod Touch 4G and iPad 1 what jailbreak mode they would like to use.

redsn0w0912b2 499x318 RedSn0w 0.9.12b2: minor update and bugfixes

Starting with version 0.9.12b2, redsn0w will now explicitly ask users with limera1n-able devices whether they want to inject rocky-racoon using the DFU ramdisk method or the backup/restore method (the ramdisk method is better for those with lots of media on their device that would create very large backups, and it’s required for those with unactivated iPhones). If you’ll always want to use limera1n, you can select that in the Preferences pane. It also fixes an iBooks issue on old-bootrom 3GS iPhones, and provides more useful error messages when things go wrong.

RedSn0w 0.9.12b2 supports untethered iOS 5.1.1 jailbreak for all devices:

  • iPhone 3GS
  • iPhone 4
  • iPhone 4S
  • iPad 1
  • iPad 2
  • new iPad 3
  • iPod Touch 3G
  • iPod Touch 4G

You can download RedSn0w 0.9.12b2 here.

iOS 5.1.1 untethered jailbreak tutorial using Redsn0w is available here.

sn0wbreeze 296 500x397 Sn0wBreeze 2.9.6 released: added Apple TV 2G iOS 5.0.2 9B830 support

iH8Sn0w released Sn0wBreeze 2.9.6. What’s new:

  • Added 5.0.2/9B830 Apple TV 2 untether payload. (Thanks @planetbeing & @nitoTV)
  • Apple TV 2 users can now resize their root partition.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

Sn0wbreeze 2.9.6 supports iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G, iPod Touch 4G and Apple TV 2G. It does not work with A5 devices, like iPad 2, iPad 3 and iPhone 4S.

You can download Sn0wBreeze 2.9.6 from here.

Our step-by-step tutorials for Sn0wBreeze 2.9.6 are available here:

Tutorials for jailbreak using Absinthe 2.0 are here.

You can find step-by-step instructions on how to jailbreak Apple TV 2G with Seas0nPass here (Windows, Mac OS).

sn0wbreeze 296 aooletv2g 500x397 Sn0wBreeze 2.9.6 released: added Apple TV 2G iOS 5.0.2 9B830 support

redsn0w 0912b1 325x400 RedSn0w 0.9.12b1 and PwnageTool 5.1.1 released: support iOS 5.1.1 untethered jailbreak redsn0w 0912b1 extras 325x400 RedSn0w 0.9.12b1 and PwnageTool 5.1.1 released: support iOS 5.1.1 untethered jailbreak

The iPhone Dev-Team has released updates to RedSn0w and PwnageTool that bring support for the iOS 5.1.1 untethered jailbreak.

RedSn0w 0.9.12b1 supports untethered iOS 5.1.1 jailbreak for all devices:

  • iPhone 3GS
  • iPhone 4
  • iPhone 4S
  • iPad 1
  • iPad 2
  • new iPad 3
  • iPod Touch 3G
  • iPod Touch 4G

PwnageTool 5.1.1 allows to create custom firmware and preserve modem version for unlock with ultrasn0w or Gevey. PwnageTool 5.1.1 supports all A4 devices:

  • iPhone 3GS
  • iPhone 4
  • iPad 1
  • iPod Touch 3G
  • iPod Touch 4G
  • Apple TV 2G

You can download RedSn0w 0.9.12b1 here and PwnageTool 5.1.1 here.

iOS 5.1.1 untethered jailbreak tutorial using Redsn0w is available here.

Official DevTeam comments:

RedSn0w
redsn0w allows owners of A4+earlier devices to install rocky-racoon two different ways:

  • backup/restore method similar to Absinthe and cinject
  • its traditional limera1n-based ramdisk install. If you have a lot of media on your A4 device (music, movies, TV shows, etc), then the ramdisk method is preferrred because it avoids any possibility of later problems related to syncing to iCloud (including Photo Stream and Music Match). The ramdisk method is not available for A5 devices or later because limera1n can’t be used. If you’d like to use redsn0w’s ramdisk method, just be sure to put the A4 device in DFU or Recovery mode before starting redsn0w (otherwise it will immediately start to use the backup/restore method).

We’ve also added a new redsn0w feature specifically for those who got in on the SAM unlock: you can now include your SAM tickets as part of your initial ramdisk jailbreak of iPhone4 or earlier, or alternatively you can upload your SAM tickets to any device after its been jailbroken. redsn0w accepts either the individual SAM activation ticket plist file, or the entire zip file created by redsn0w’s “Backup” button. As usual, redsn0w continues to cover all of its previous jailbreaks and untethers (so redsn0w-0.9.12b1 covers everything from 5.1.1 all the way back to 4.1).

PwnageTool
PwnageTool also avoids any possible sync issues, but again it applies only to A4+earlier devices. If you unlock your iPhone with ultrasn0w or a commercial method, you must use PwnageTool to avoid updating your baseband otherwise you’ll lose the unlock. PwnageTool will also jailbreak+untether the AppleTV2,1 5.0_2B206f (unless you customize the IPSW further, you’ll have just basic SSH access to the device).

absinthe204 488x400 Absinthe 2.0.4 released: added iPad 2,4 support

Chronic Dev Team released new version of untethered iOS 5.1.1 jailbreak utility – Absinthe 2.0.4. New version supports the new iPad 2,4.

You can download Absinthe 2.0.4 here.

Step-by-step tutorials are available here.

absinthe stats Nearly 1,000,000 Apple devices already jailbroken using Absinthe 2.0

The Chronic Dev-Team has announced that nearly 1,000,000 iDevices have already been jailbroken with Absinthe 2.0.

Some stats since release of #Absinthe – 211,401 jailbroken iPad3’s and 973,086 devices newly jailbroken! #JBFTW ! ;D

Our step-by-step tutorials for Absinthe 2.0 are available here.

sn0wbreeze 295 496x400 Sn0wBreeze 2.9.5 released: added iPhone 4 (GSM) 9B208 support and GPS fixed for iPhone 3GS

iH8Sn0w released Sn0wBreeze 2.9.5. What’s new:

  • Added 5.1.1/9B208 untether payload for the iPhone 4 GSM.
  • Added iPhone 3GS (iPad Baseband users) location services fix.

Just like version 2.9.4 the new 2.9.5 version supports untethered jailbreak of A4 devices on iOS 5.1.1. Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

Sn0wbreeze 2.9.5 supports iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G, iPod Touch 4G and Apple TV 2G. It does not work with A5 devices, like iPad 2, iPad 3 and iPhone 4S.

You can download Sn0wBreeze 2.9.5 from here.

Our step-by-step tutorials for Sn0wBreeze 2.9.5 are available here:

sn0wbreeze 294 499x395 Sn0wBreeze 2.9.4 Supports Untethered Jailbreak of iOS 5.1.1

iH8Sn0w released Sn0wBreeze 2.9.4 with the ability to perform an untethered jailbreak of A4 devices on iOS 5.1.1. Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

Sn0wbreeze 2.9.4 supports iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G, iPod Touch 4G and Apple TV 2G. It does not work with A5 devices, like iPad 2, iPad 3 and iPhone 4S.

You can download Sn0wBreeze 2.9.4 from here.

Our step-by-step tutorials for Sn0wBreeze 2.9.5 are available here: