Jailbreak iPhone, iPod Touch, iPad

iPhone Dev Team have just released a new version of RedSn0w 0.9.10b4. It includes a fixes for iBooks and launchctl. As always, you can simply run the new redns0w over your current jailbreak, just make sure to uncheck Cydia. To fix iBooks and launchctl errors you can also simply install new version of Corona from Cydia.

Update #4: The b4 version of redsn0w incorporates the 5.0.1 fix for iBooks, and also for sporadic problems with launchctl. Thanks to @xvolks for merging the iBooks (sandbox) fix from @comex’s github into the overall corona untether from @pod2g! As usual, you can choose to install the fix either by re-running redsn0w over your existing jailbreak (de-select Cydia if you do that), or by installing the corona package from Cydia (it’s the same set of files no matter which way you choose).

You can download the new version of RedSn0w from here.

Untethered jailbreak is available for iOS 5.0.1 firmware on iPhone3GS, iPhone4, iPhone4-CDMA, iPad1, iPod touch 3G, iPod touch 4G.

1. If you’re already on iOS 5.0.1 with a tethered jailbreak, you have two even choices:

1. Run redsn0w 0.9.10 over your current jailbreak (deselect “Install Cydia”)
2. Install the Cydia package prepared by the chronic devteam. It is called Corona 5.0.1 Untether. (tutorial)

2. If you are not on 5.0.1 yet, update now! If you unlock via ultrasn0w or gevey, make sure you update to 5.0.1 via a custom IPSW! See our guides for sn0wbreeze here. Once you’re at 5.0.1, use the latest redsn0w 0.9.10 to both jailbreak and untether.

You can download RedSn0w 0.9.10b1 here.

Our step-by-step tutorials for untethered jailbreak using redsn0w 0.9.10:

• iPhone 4
• iPhone 3GS
• iPod Touch 4G
• iPod Touch 3G
• iPad 1

UPDATE: official ultrasn0w with iOS 5.0.1 released!

This tutorial is for those users of locked iPhone 3GS and iPhone 4, who updated to iOS 5.0.1 and realized that ultrasn0w unlock doesn’t work there.

Indeed DevTeam have not updated software unlock utility ultrasn0w to work with the latest iOS 5.0.1. There are two workarounds, that will make ultrasn0w work on 5.0.1.

Read the rest of this entry »

Right after the announcement earlier today that DevTeam has successfully made first steps towards iPhone 4S jailbreak, here is more news.

iPad 2 iOS 5 jailbreak is possible and done and to prove it MuscleNerd published a quick video:

As with iPhone 4S, do not expect utility to be released anytime soon. There’s a lot of work to finish before that.

iPhone DevTeam member MuscleNerd recently tweeted that iPhone 4S jailbreak was finally made:

MuscleNerd
VERY preliminary 4S JB: http://twitpic.com/76vcp4 http://twitpic.com/76vct2 (Huge missing pieces prevent public release. LOTS of work left)

This is just a first step, and as MuscleNerd said there’s a lot of work left to do. So don’t expect to see new utility anytime soon. But this is still great news.

Take a look at the screenshots with terminal and Cydia running on iPhone 4S:

UPDATE: iPad 2 iOS 5 jailbreak video

The iPhone Dev-Team released jailbreak utility RedSn0w 0.9.9b6 for both Windows and Mac users. The new version offers full iOS 5 jailbreak support for Windows and fixes Location Services issue for iPhone 3GS devices running the 06.15 baseband. This is still a tethered jailbreak for iPhone 4, iPhone 3GS, iPad 1, iPod Touch 3G and iPod Touch 4G:

We’ve released version 0.9.9b6 of redsn0w, with both a functional fix and cosmetic fix for iOS5 jailbreakers. For iPhone3GS owners with the 06.15 baseband, this redsn0w eliminates the network crash you saw when using Location Services in iOS5 (in fact, you don’t even need to disable Location Services anymore during the initial setup). The cosmetic fix is to the visual countdown you see when going into DFU mode.

It’s okay to re-run this redsn0w over an existing device jailbroken at iOS5. Just choose “Jailbreak” again and de-select Cydia (in other words, all the checkboxes will be unchecked). If you are lucky enough to have an old-bootrom iPhone3GS, please pre-select the IPSW first (redsn0w can’t yet auto-detect the FW version of your old-bootrom 3GS if it’s already been jailbroken).

Just as redsnow 0.9.9b5 the new version supports creating custom firmwares with preserving baseband (modem) version for unlock. Unfortunately right now custom firmware functionality works only with Mac version.

You can download the latest RedSn0w version here.

UPDATE:
Here are links to our RedSn0w 0.9.9 iOS 5 jailbreak tutorials:

• Windows: iPhone 4, iPhone 3GS, iPad 1, iPod Touch 3G, iPod Touch 4G
• Mac OS: iPhone 4, iPhone 3GS, iPad 1, iPod Touch 3G, iPod Touch 4G

If for some reason you don’t want to use redsn0w 0.9.9 to jailbreak your iOS 5, here is a good alternative utility – Sn0wBreeze 2.8b8. It can perform a tethered jailbreak for iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G and iPod Touch 4G.

As usual it will preserve your baseband (modem) version for unlock with ultrasn0w 1.2.4 or Gevey Sim.

You can download Sn0wBreeze 2.8b8 here.

UPDATE: Sn0wBreeze 2.8b8 step-by-step jailbreak and unlock tutorials:

• iPhone 4 - Sn0wBreeze (Windows)
• iPhone 3GS - Sn0wBreeze (Windows)

The iPhone Dev-Team has released an update to their UltraSn0w unlock bringing support for iOS 5. Remember that NO new basebands are supported in this release. It only adds support for iOS 5 with old basebands.

Here is the list of supported basebands:

• iPhone 4: 01.59.00
• iPhone 3G/3GS: 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

If have one of the above baseband version and need unlock you can upgrade to iOS 5 without updating your baseband using RedSn0w 0.9.9b5.

Ultrasn0w 1.2.4 is available in Cydia.

We’ve updated ultrasn0w to be compatible with iOS5, which came out a few days ago. While ultrasn0w 1.2.4 (available now in Cydia) doesn’t add support for any new basebands, the update is required for any ultrasn0w unlockers trying out iOS5 (it remains backwards compatible though, so you should be able to use it no matter what firmware you have).

The supported basebands for the iPhone 3G and 3GS are 04.26.08, 05.11.07, 05.12.01, 05.13.04, and 06.15.00. The baseband supported for the iPhone4 is 01.59.00.

Remember, the only way to get to iOS5 while preserving your ultrasn0w-compatible baseband is by using a custom IPSW. redsn0w now has the ability to create such a custom IPSW for you (at least on Macs…the same capability for Windows will be coming soon).

The majority of people who use ultrasn0w at iOS5 right now will probably be those with old-bootrom iPhone3GS devices, since they already have an untethered jailbreak via redsn0w. For everyone else, the iOS5 jailbreak is currently tethered and you need to “Just boot” tethered with redsn0w every time your phone reboots. That’s not always easy to do if your phone reboots while away from home!

Note: there’s a special “trick” that iPhone3GS owners with baseband 06.15 need for iOS5. During the new setup screens you see when you start iOS5 for the first time, you’ll be asked about Location Services. Be sure to select “Disable Location Services” when asked! Later on in the setup, you’ll have the chance to turn on Location Services again when asked if you want to use “Find my iPhone”. It’s fine to turn it back on at that point, if that’s your desire (or you can always go in and enable it in Settings.app).

Also, some iPhone3GS users with the 06.15 baseband may have tried to install iOS5 using a stock IPSW (even though you should never ever try to use a stock IPSW if you’re an ultrasn0w unlocker). If you did try this, your baseband is probably in an inconsistent state, and you’ll need to reflash the 06.15 baseband again (using redsn0w). Be very careful if you use redsn0w to reflash the iPad baseband — don’t interrupt the process! And please avoid using stock IPSWs in the future Unlockers should never go near stock IPSWs.

UPDATE: Apple latest firmware is iOS 5.0.1. Apple has stopped signing all other firmwares, including iOS 4.3.3 and iOS 4.3.5. This means you can NOT restore to 4.3.3/4.3.5 any more (both original and custom), unless you have saved your SHSH keys for it.

If you have decided to perform an untethered jailbreak and unlock, you need to get the following information:

1. What type of device do you have (iPhone 3G/3GS/4, iPod Touch 3G/4G, iPad 1/2, Apple TV)?
2. Do you need unlock (if your iPhone locked to one carrier and you want to use it with another)?
   The answer is NO, if the device is not iPhone, if it was purchased as factory unlocked and can be used with any cellular carrier (f.e. in Canada, France, etc).
   If the answer is YES, you need to find out your modem version (Setting-General-About-Modem).
3. What firmware version do you have? Take a look at Setting-General-About-Version. For example it could be iOS 4.3.3.
4. What operating system do you use on your desktop (Windows, Mac OS)?

How to perform jailbreak, when you do NOT need an unlock

For iPhone 3G the latest is iOS 4.2.1. You can perform jailbreak with any utility. For iOS 4.2.1 you can also use them or GreenPois0n (Windows, Mac OS).

iPad 2 jailbreak is available only for iOS 4.3.3 via JailbreakMe and and iOS 5.0.1 via Absenthe.

iPhone 4S jailbreak is available for iOS 5.0 / iOS 5.0.1 via Absenthe.

iOS 4.3.3

Apple stopped signing iOS 4.3.3, so you cannot update to iOS 4.3.3 without SHSH keys saved (in advance some time ago). If you have iPhone 4, iPhone 3GS, iPad 1, iPod Touch 3G or iPod Touch 4G that run iOS 4.3.3 – use JailbreakMe or RedSn0w to untether jailbreak your device.

If you have saved SHSH keys for iOS 4.3.3 you can use PwnageTool (Mac OS) or Sn0wBreeze (Windows).

iOS 4.3.4/4.3.5

For iOS 4.3.4/4.3.5 only tethered jailbreak is possible with redsn0w. Tethered means that each time you restart your device you will have to connect it to a computer and run redsn0w. The untethered iOS 4.3.5 jailbreak is possible only for iPhone 3GS with old bootrom. You can detect your bootrom version using this tutorial.

iOS 5

To jailbreak and unlock iOS 5 use latest version of redsn0w 0.9.9 or sn0wbreeze 2.8. You can jailbreak tethered or semi-tethered.

The untethered iOS 5 jailbreak is possible only for iPhone 3GS with old bootrom. You can detect your bootrom version using this tutorial.

iOS 5.0.1

For iPhone 4/3GS, iPad 1, ipod Touch 3G/4G an untethered jailbreak is available for iOS 5.0.1. For untethered jailbreak use the latest redsn0w 0.9.10 or Corona – package from Cydia to untether currently installed tethered jailbreak.

Tutorial how to untether installed tethered jailbreak is available here.

For iPhone 4S and iPad 2 use Absenthe.

For tethered iOS 5.0.1 jailbreak you an use redsn0w 0.9.9 and sn0wbreeze 2.8.

You can download all firmwares here.

Tutorials

Here are our step-by-step tutorials that will guide you through the jailbreak process:

iPhone 4S

UnTethered jailbreak iOS 5.0 / iOS 5.0.1:

• Absinthe (Windows)
• Absinthe (Mac)

iPhone 4

UnTethered jailbreak iOS 5.0.1:

• RedSn0w (Windows)
• PwnageTool (Mac)

Semi-Tethered jailbreak iOS 5.0.1:

• RedSn0w (Windows)
• Sn0wBreeze (Windows)

Semi-Tethered jailbreak iOS 5:

• RedSn0w (Windows)
• RedSn0w (Mac OS)
• Sn0wBreeze (Windows)

Tethered jailbreak iOS 4.3.5:

• RedSn0w (Windows)
• RedSn0w (Mac OS)

UnTethered jailbreak iOS 4.3.3:

• RedSn0w (Windows)
• RedSn0w (Mac OS)
• PwnageTool (Mac OS)
• Sn0wBreeze (Windows)
• JailbreakMe (works without a computer)

Read the rest of this entry »

MuscleNerd has announced via Twitter that jailbreak utility RedSn0w 0.9.9b1 is released with major update and numerous new features:

Major improvements and features added to redsn0w 0.9.9b1! See update #9 at http://is.gd/6eek4Y Feedback: @redsn0w_testers

Indeed the list of new features is quite high. There are two main ones:

• There is no need to download firmware any more. There is no need to push Browse IPWS button any more (but you still can).
• Developers added lots of functionality to work with SHSH keys (extract, submit, download, verify, stitch etc)

However this new version does not bring features like untethered jailbreak for iOS 4.3.5 or iOS 5.

Due to some possible bugs we still recommend to use the old RedSn0w 0.9.8b7b, but the new 0.9.9b1 is worth seeing and playing with.

Here are links to our RedSn0w 0.9.8b7b iOS 4.3.5 jailbreak tutorials:

• Mac OS: iPhone 4, iPhone 3GS, iPad 1, iPod Touch 3G, iPod Touch 4G
• Windows: iPhone 4, iPhone 3GS, iPad 1, iPod Touch 3G, iPod Touch 4G

You can download RedSn0w 0.9.9b1 here:

Here is the full list of features from DevTeam:

Update #9: A bunch of new features!

• uses DFU mode to try to automatically determine which device and FW you have
• fetches pieces of public IPSWs from Apple (once).  Non-public IPSWs must be provided manually (once).  It then caches those pieces for future use.
• “Just boot” is a tethered boot.  Uses whatever “Preferences” you’ve set for boot logo and kernel boot-args
• “Pwned DFU” puts your device in a pwned DFU state for some of the iTunes stuff detailed below
• “Recovery fix” gets past 1015 types of errors (when baseband portion of restore fails).  Should work on iOS5 beta too
• “Select IPSW” is for picking non-public IPSWs, or overriding auto-detection
• “SHSH blobs” has a bunch of options…
  • “Fetch” – fetch current PARTIAL blobs on device.  Should complete in under 10 or 15 seconds.  Puts the set of PARTIAL of blobs on your computer as a plist.  Checks if Cydia already has a full set for this device and build.  If not, it submits this PARTIAL set and returns Cydia’s acknowledgement or rejection
  • “Verify”  – cryptographically verifies existing blob files from either redsn0w, TinyUmbrella, or Cydia server.  You can select a whole bunch of blobs to verify at once if you want (like the TinyUmbrella directory)
  • “Submit”  – both verifies and submits one or more blob files to Cydia.  This lets you copy your entire TinyUmbrella cache of blobs up to the Cydia server
  • “Query” - queries the Cydia server for all available FULL or PARTIAL blobs for a given set of ECIDs
  • “Stitch” – stitches either FULL or PARTIAL blobs to a STOCK or CUSTOM IPSW

1. Stitching is NOT yet supported on iPhones! Need to work out the baseband part of the restore process.
2. FULL blobs stitched to a STOCK IPSW gives you a completely self-contained signed IPSW that iTunes will accept without any tricks (no need to go into pwned DFU mode, no need to start TinyUmbrella TSS server, no need to redirect to Cydia server for blobs)
3. PARTIAL blobs stitched to any IPSW requires you to go into pwned DFU mode before running iTunes.  No need to start TU or use Cydia though.
4. Stitching either FULL or PARTIAL blobs to a CUSTOM IPSW also requires a pwned DFU start before iTunes restores.  No need to start TU or use Cydia though./li>
5. Will eventually support fetching the blobs directly from Cydia instead of a file on your computer