Redsn0w | Jailbreak iPhone, iPod Touch, iPad Skip to content

Jailbreak iPhone, iPod Touch, iPad

новости про джейлбрейк iPhone, iPod Touch и iPad


Tag: redsn0w

Good news for all iPhone 3G and iPod touch 4G owners – a jailbreak tool called p0sixspwn has been updated to support the recently released iOS 6.1.6. Using this small utility, you can perform an untethered jailbreak effortless.

p0sixspwn updated P0sixspwn Jailbreak Tool Updated to Support iOS 6.1.6

According to what iDownloadBlog reporters write,

If you’re currently using an iPhone 3GS or a 4th generation iPod touch running iOS 6.1.x, it’s highly recommended that you update to iOS 6.1.6, and benefit from Apple’s SSL fix. The good news is that you can then use p0sixspwn to enjoy the same untethered jailbreak that was available for iOS 6.1.3 through iOS 6.1.5.

P0sixspwn is a jailbreak tool developed by iH8sn0w and Winocm. It can be downloaded from Cydia’s ‘System’ section. However, before downloading p0sixspwn you need to perform a tethered jailbreak using RedSn0w or any other utility.

Keep in mind that it is recommended that you update to the latest iOS 6.1.6 as soon as possible since it contains a fix for SSL connection verification.

p0sixspwn 225x400 Untethered jailbreak for iPhone 4, iPhone 3GS, and iPod Touch 4G with iOS 6.1.3   6.1.5

H8sn0w has announced the release of an untether package for the old devices running iOS 6.1.3 – 6.1.5. This includes iPhone 4, iPhone 3GS, and iPod Touch 4G.

With the unexpected release of the evasi0n7 jailbreak, we are finally able to release the 3GS/A4 6.1.3 + 6.1.5 untether Cydia package.

To get the package you must have already performed a tethered jailbreak via redsn0w or sn0wbreeze. Simply open Cydia, refresh the packages from the Changes tab, and then search for “p0sixspwn”.

Sn0wbreeze will be updated at some point to incorporate the untether directly. The next priority is a jailbreak for all devices on iOS 6.1.3 and iOS 6.1.4, including A5 devices (iPad 2/3/4, iPhone 4S/5, etc).

H8sn0w says no eta, however:

We expect it should be out by Christmas day. So if you don’t feel like upgrading to iOS 7 and prefer 6.1.3/6.1.4, sit tight for a bit. :)

open jailbreak P0sixninja plans to create OpenJailbreak

Hacker p0sixninja (Joshua Hill) tweeted that he plans to create OpenJailbreak, a new repository of open source jailbreak components on Twitter earlier today.

Ok, I hate redsn0w, I hate sn0wbreeze, and I hate 6.1.3. I’m ready to get this #openjailbreak off the ground

Elaborating further he told:

Essentially it’s going to be a repository of open source jailbreak components that I created over the years. So much of my code has been hacked up and incorporated into other projects, it’s becoming very fragmented. There’s no central repository to maintain all this code, to allow other developers to submit patches or help layout a roadmap for what new features and abilities will be added in the future.

Surenix is reportedly working on the development of the website for the repository and Hill is organizing that components that will be posted.

Hill also says “this is just a small part of an ultimate plan” perhaps eluding to another recent tweet which said, “I got a lot of amazing things coming to you all soon. think bigger than jailbreak ;)

Notably, developer Ryan Petrich posted an image on Twitter earlier today which appears to indicate that there already is a jailbreak for iOS 7.

ios 601 jailbreak 500x329 Tutorials for iOS 6.0.1 jailbreak

Here are our step-by-step tutorials that will guide you through all the process of tether jailbreaking iOS 6.0.1 with redsn0w and sn0wbreeze:

iphone 4 s Tutorials for iOS 6.0.1 jailbreak iPhone 4

Tethered jailbreak iOS 6.0.1

Read the rest of this entry »

redsn0w 0915b3 312x400 RedSn0w updated to version 0.9.15b3

The iPhone Dev-Team has announced an updated version of RedSn0w and an upcoming update to UltraSn0w for iOS 6 compatibility.

Version 0.9.15b3 fixes the redsn0w “error 2601” that Windows users were seeing using the Restore button. It also fixes a related Windows iTunes error 14 for stitched files. Note that if you have a baseband, you should probably avoid stitching and simply use redsn0w’s native Restore (not iTunes).

Those lucky recipients of new iPad minis and iPad4s on Friday can use this redsn0w to save your 6.0 blobs off to Cydia. First connect your new device and turn it on, then use redsn0w’s Extras->SHSH Blobs->New and point it at the 6.0 IPSW.

Expect an ultrasn0w compatibility update for iOS 6.0 by Friday (mostly useful for 3GS old-bootrom users who are currently enjoying the untethered 6.0 jailbreak!). Same baseband support as with 5.x.

Thanks to @iamgolfy for helping test the 2601 Windows fix!

You can download the latest version of RedSn0w from here.

ios 6 jailbreak Tutorials for iOS 6 jailbreak

UPDATE: tutorials for iOS 6.0.1 jailbreak are available here.

Here are our step-by-step tutorials that will guide you through all the process of tether jailbreaking iOS 6 with redsn0w:

iphone 4 s Tutorials for iOS 6 jailbreak iPhone 4

Tethered jailbreak iOS 6

trans Tutorials for iOS 6 jailbreak

iphone3gs s Tutorials for iOS 6 jailbreak iPhone 3GS

(Un)Tethered jailbreak iOS 6

ipod touch 4g s1 Tutorials for iOS 6 jailbreak iPod Touch 4G

Tethered jailbreak iOS 6

Tutorials for iOS 5.1.1 can be found here.

Tutorials for iOS 5.0.1 can be found here.

Tutorials for iOS 5.1 can be found here.

Other tutorials are available here.

redsn0w 0915b2 313x400 DevTeam released RedSn0w 0.9.15b2

The iPhone Dev-Team has updated RedSn0w 0.9.15 with some bug fixes for iPhone 3GS and iPad owners.

Version 0.9.15b2 fixes a few issues for 3GS owners: old-bootrom awesomeness is no longer forgotten directly after a restore, and iPad baseband upgrade/downgrade support is fixed (same production date cutoffs apply!). If your 3GS is currently tethered at 6.0 even though you have an old bootrom, just re-run redsn0w’s Jailbreak step (no need to restore). Don’t forget you can add some pizzaz with your own boot logo or a nerdy verbose boot.

Redsn0w 0.9.15 brought gives us possibility to do iOS 6 jailbreak and different downgrade options.

You can download RedSn0w 0.9.15b2 here.

redsn0w ios6 313x400 Tethered iOS 6 jailbreak released

The iPhone Dev-Team has announced RedSn0w 0.9.15b1 which brings numerous new features including iOS 6 jailbreak for old devices, ability to restore to older firmware, manipulating SHSH blobs and etc.

iOS 6 jailbrak is tethered for iPhone 4, iPhone 3GS and iPod Touch 4G, untethered only for old iPhone 3GS with old bootrom. Tethered jailbreak means that each time you restart your device you will need to connect it to a computer and run redsn0w.

iPhone 4S, iPhone 5, iPad 2 and iPad 3 are not supported.

We will create our step-by-step tutorials soon.

You can download RedSn0w 0.9.15b1 here.

redsn0w 0914b2 295x400 RedSn0w 0.9.14b2 improves 06.15 downgrade for iPhone 3GS/3G

The iPhone Dev-Team released RedSn0w 0.9.14b2 with improved algorithm for baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b2 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04. With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before). This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

The revised steps are:

  1. Connect your iPhone in normal mode, then click “Jailbreak” after redsn0w identifies its model and BB version (you needn’t pre-select the IPSW anymore).
  2. Choose the “Downgrade from iPad baseband” option (you needn’t worry about de-selecting Cydia anymore).
  3. Do a controlled “slide to power off” shutdown of your phone and proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step. THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running. Please just let it be for the next 3-8 minutes! When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners. The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

Redsn0w 0.9.13dev2 313x400 iPhone Dev Team Releases Redsn0w 0.9.13dev2

The iPhone Dev-Team has released an update to iOS 6 jailbreakRedSn0w 0.9.13dev2. New version resolves problems with SSH.

The “dev2″ version should fix the various SSH problems and crashes with apps that some have been seeing.

You can download the latest version of RedSn0w from here.