Job | Jailbreak iPhone, iPod Touch, iPad Skip to content

Jailbreak iPhone, iPod Touch, iPad

новости про джейлбрейк iPhone, iPod Touch и iPad

Archive

Tag: job

redsn0w 0914b2 295x400 RedSn0w 0.9.14b2 improves 06.15 downgrade for iPhone 3GS/3G

The iPhone Dev-Team released RedSn0w 0.9.14b2 with improved algorithm for baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b2 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04. With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before). This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

The revised steps are:

  1. Connect your iPhone in normal mode, then click “Jailbreak” after redsn0w identifies its model and BB version (you needn’t pre-select the IPSW anymore).
  2. Choose the “Downgrade from iPad baseband” option (you needn’t worry about de-selecting Cydia anymore).
  3. Do a controlled “slide to power off” shutdown of your phone and proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step. THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running. Please just let it be for the next 3-8 minutes! When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners. The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

redsn0w 0914b1 313x400 RedSn0w 0.9.14b1 Released: 06.15 Downgrade for iPhone 3GS/3G

The iPhone Dev-Team released RedSn0w 0.9.14b1 that can perform a baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b1 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04.  With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before).  This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

Here are the steps:

  1. Use the “Extras->Select IPSW” button in redsn0w to tell it which firmware version you have installed (new-bootrom 3GS users can usually skip this step but it doesn’t hurt for them to do it too).
  2. Do a controlled shutdown of your iPhone (“slide to power off”).  This step is very important to avoid mount problems when the ramdisk is running!
  3. Go back to the first screen and click “Jailbreak”.  Enable the “Downgrade from iPad baseband” checkbox, disable Cydia if you already have it installed, and click Next to proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step.  THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running.  Please just let it be for the next 3-8 minutes!  When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners.  The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later.  If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone!  Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

musclenerd Quick info about iOS 5.1.1 Untethered Jailbreak

MuscleNerd from the iPhone Dev-Team has posted some details on the upcoming untethered jailbreak from pod2g.

  • All info below is tentative and subject to last minute refinements
  • @pod2g’s 5.1.1 jailbreak+untether is working out great. All devices are covered except for AppleTV3,1, which currently has no path for jailbreaking.
    - the initial 5.1.1 plan used a kernel exploit from @westbaer which unfortunately precluded use in iPod3,1 and iPhone2,1
    - @planetbeing stepped up and provided a kernel exploit that covers both of those. Those two JBers are the bomb!
  • The 5.1.1 A5 JB is very similar to the A5 5.0.1 JB. @pimskeks has done a tremendous job supporting both 5.0.1 and 5.1.1 in absinthe
  • Similar to 5.0.1, there will also be a 5.1.1 CLI “cinject” binary and redsn0w version of the 5.1.1 JB+untether. Absinthe, cinject, and redsn0w will all provide the same JB in different fashions.
    - timing is indeterminate. Plans are for this week, but a number of factors can influence that.
  • For those wishing to donate, we’ve set up a new 5.1.1 paypal URL: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4U6DQGJ2NRVUN
  • Please don’t pirate AppStore apps (seriously, please do not).

redsn0w 099b9 325x400 RedSn0w 0.9.9b9b released: now fully supports iOS 5.0.1 and SHSH/APTickets

iPhone Dev-Team released RedSn0w 0.9.9b9 with full iOS 5.0.1 support (no need to point to iOS 5.0 any more). New version also features support for SHSH and APTickets:

  • native support for 5.0.1 (no need to point redsn0w at 5.0 IPSW or use command-line args).  Support automatically extends to all of redsn0w’s various functions: “Jailbreak”, “Just boot”, “Fetch blobs”, “Stitch blobs”, “Recovery Fix”
  • iBooks fixed in 5.0 and 5.0.1.  This is a targeted fix that doesn’t remove entire sandbox mechanism.  5.x users already using redsn0w “Just Boot” can just use the new version without redoing entire jailbreak again
  • 3GS old-bootrom owners can now create custom IPSWs without blobs
  • ultrasn0w compatability update (i.e. same baseband requirements) for 5.0.1 will be available on Cydia Monday
  • support for newer 8GB iPhone4 (which until now had problems with “Fetch blobs”).  Thanks to @JKjeepnJeff for loaning us one of these newer i4 units for testing!
  • allows Windows users (not just OS X users) to use the “Custom” button to create IPSWs without baseband updates.  (Update: please wait for 0.9.9b9b for this!)
  • accommodates APTickets in 5.x (until next Apple countermove).  APTickets are crypto-verified before submitting to Cydia, just like the main blobs.  Cydia server support for sending back the APTickets is upcoming.  For now, use stitched IPSWs for 5.x.  Due to APTickets, stitched 5.x IPSWs now require user to start in “Pwned DFU” mode
  • Support added for stitching 4.x blobs to iPad2-GSM IPSWs.  Similar to @notcom’s TinyCFW but doesn’t require lots of RAM or a TSS-assisted restore. Won’t work for iPad2 5.x blobs (or iPhone4S at all) until a bootrom-level exploit is out
  • top line now shows whether (and where) a redsn0w update is available, or if the version being run is the latest.  Uses DNS TXT record to alleviate any concerns about snooping
  • no 5.1 beta support at this time (major apps like Cydia are not yet compatible)
  • @pod2g has been doing a great job porting his 5.x untether…check his blog for updates!
  • Owners of newer 3GS iPhones must not flash the iPad baseband.  The iPad baseband will not work on 3GS iPhones built later than 2011 week 35.  You have a week 35 or later device if your serial # starts with xx135.
Update #17b: Version 0.9.9b9b enables the “Custom” button for Windows users, and make the 3GS week 35 warning a more explicit part of the process.

You can download RedSn0w 0.9.9b9b here.

UPDATE: redsn0w updated to redsn0w 0.9.9b9d.

redsn0w 099b9 2 RedSn0w 0.9.9b9b released: now fully supports iOS 5.0.1 and SHSH/APTickets

iOS4 300x46 Software Update to Fix iPhone 3G Performance Issues is on Its WaySteve Jobs, Apple’s CEO, confirmed that the new software update iOS 4.x will appear in the near future to correct performance problems on the iPhone 3G, which works on iOS 4.x. He confirmed it while answering to the email he got from a user who was disappointed with the iPhone 3G performance running on iOS 4, describing it as “dog slow”.

Although he did not mention a specific version or date of its release we can guess that he was specking about iOS 4.1, which is going to be released next month, when iTV (Apple TV) and the next generation iPod touch will spotlight.

T1000 300x208 iPhone 5 to Be Made of Liquid Metal, à la T 1000 from Terminator 2?Do you remember the robot called T-1000 Skynet made of liquid metal in the film Terminator 2? It seems that Steve Jobs decided to create devices of next generation using Liquidmetal Technologies, a California company from which Apple has recently acquired the exclusive rights for creation of liquid metal alloy products.

One of the best and most distinctive factors in all Apple products is how this company produces its own devices, the quality of production, as well as the materials used, which, undoubtedly, have first-class quality.

Now that Apple has the exclusive rights to create products of the liquid metal, we can assume that it has no plans to create a robot for the next Terminator movie, but probably will use it for such devices as iMac, iPad and iPhone of the next generation in order to be one step ahead of its competitors.

AppleLiquidMetal iPhone 5 to Be Made of Liquid Metal, à la T 1000 from Terminator 2?

iH8Sn0w has successfully performed a tethered jailbreak for iPhone 3GS with new firmware  iOS 4 and the new bootrom. Unfortunately this jailbreak requires users to have 3.1.2 SHSH blobs saved.

Alright… If anyone has their 3.1.2 SHSH blobs, NOT 3.1.3. Then I’ll see if I can produce a tool that will do this job…

Here is a video demo posted by AKinGdom1:

The utility will be available soon. Might be as soon as tomorrow.

Redmondpie have completed the HTC Hero theme for iPhone. They have done a really good job because it looks good:

It works on jailbreaked iPhones via Winterboard. Here is a link to step-by-step installation instructions. I guess this theme will appear in Cydia quite soon, so installation would be much easier.

Here is a video that shows this HTC Hero theme on iPhone:

via redmondpie

purplera1n1 Purplera1n: iPhone 3GS jailbreak by GeoHot

Geohot released a beta software for iPhone 3GS jailbreak called PurpleRa1n. It is beta and has some issues, but it gets the job done if you’re patient.

Requirements: You must have
1) Windows xp sp2, Vista, Windows 7, MAC OS
2) iTunes 8.2.0.23
3) Purplera1n software

The jailbreak is a bit incomplete. The kernel vm_mem patch is not present so Winterboard will not work as some other critical tweaks. (SBSettings does work!).

Use with caution and be patient. If you’re not in a hurry, wait for the release from DevTeam.