Jailbreak iPhone, iPod Touch, iPad

iH8Sn0w released Sn0wBreeze 2.9.7 that brings support for tethered jailbreak of iOS 6.0.1. New version supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

What is New?
● Added 6.0 (10A403)/6.0.1 (10A523) support. (Only includes iPhone 3GS & A4 devices).
● The 6.0/6.0.1 is currently a tethered based jailbreak via iBooty (except for iPhone 3GS old bootrom users).
● SAM is built-in for iOS 6 hacktivations. (Hacktivated phones can reboot to a semi-tethered state after being activated [rather than just hang at the Apple Logo]). Kudos @sbingner!

Downgrading:
● Use iFaith mode after selecting/downloading the appropriate IPSW for your device. You will then be prompted to browse for SHSH blobs for the IPSW you have selected.
● Remember to enter a PWNED DFU state with sn0wbreeze’s iREB button in the top bar of sn0wbreeze prior to (SHIFT + Restoring) the custom signed IPSW!

iREB & iOS 6:
Due to some changes in iOS 6, the current public standalone version of iREB will NOT enter a proper PWNED DFU state for restoring to custom iOS 6 IPSWs. An update for the standalone version should come sometime this week. In the meantime, use the iREB tab located in sn0wbreeze’s top status bar to enter a proper PWNED DFU state.

A5(X)/A6(X) Support?:
As stated many times in the past, sn0wbreeze cannot be updated to work on A5(X)/A6(X) devices until a low level exploit in DFU or iBoot is found and made public.

A5(X)/A6(X) Baseband Preservation/Hacktivation?
For those running A5(X)/A6(X) devices and need to preserve your baseband, there is nothing you can do at the moment. For those wanting to hacktivate, the only advice I can give is to buy the carrier’s SIM (the one its locked to obviously) on ebay. The SIM does not have to be active with the carrier to activate the phone.

Known Bugs/Issues:
● Windows 8 users currently need to use this workaround to run sn0wbreeze.
● iPad baseband will fail to flash on iOS 4.0 –> iOS 4.2.1 restores.
● iPod Touch 2G 4.x.x restores fail.

The iPhone Dev-Team released RedSn0w 0.9.14b2 with improved algorithm for baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b2 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04. With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before). This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

The revised steps are:

1. Connect your iPhone in normal mode, then click “Jailbreak” after redsn0w identifies its model and BB version (you needn’t pre-select the IPSW anymore).
2. Choose the “Downgrade from iPad baseband” option (you needn’t worry about de-selecting Cydia anymore).
3. Do a controlled “slide to power off” shutdown of your phone and proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step. THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running. Please just let it be for the next 3-8 minutes! When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners. The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

FireCore announced today that they have successfully jailbroken the Apple TV 2 with the latest iOS 5.1 (5.0). The jailbreak is tethered which requires the Apple TV to be connected to a Mac/PC when powering it on (each time).

Today we’re happy to release new versions of Seas0nPass and aTV Flash (black) that are compatible with latest 5.0 (iOS 5.1) software running on the ATV2.

What’s new in the 5.0 AppleTV software? Should I update?

• New interface: - Fast, visual access to all content choices
• Movie purchases in iCloud: Support for buying movies on Apple TV and playing back purchased movies from iCloud
• Genius Recommendations: Recommendations for content on the iTunes Store based on previous rentals and purchases
• Screensaver photos: New National Geographic photos built-in for screensaver
• On-device sign-up: On-device sign up for content partners on Apple TV using your Apple ID

Updating to the new 5.0 software is not required, and all aTV Flash (black) features will continue to be supported on AppleTV versions 4.2 and later.

What about the ATV3, will this work?

Unfortunately not. Work is still ongoing for the ATV3, and we hope to have more news soon. For the latest updates be sure to follow us on Twitter.

Which plugins are currently supported on 5.0?

• Couch Surfer (works)
• Last.fm (works)
• Maintenance (works)
• Media Player (works)
• NitoTV (works)
• RSS Feeds (works)
• Weather (works)
• Overflow (not working)
• Plex (not working)
• Remote HD (not working)
• Rowmote (not working)
• XBMC (not working)

Note: Non-working items require an author update for 5.0 compatibility.

iPhone Dev-Team released RedSn0w 0.9.9b9 with full iOS 5.0.1 support (no need to point to iOS 5.0 any more). New version also features support for SHSH and APTickets:

• native support for 5.0.1 (no need to point redsn0w at 5.0 IPSW or use command-line args).  Support automatically extends to all of redsn0w’s various functions: “Jailbreak”, “Just boot”, “Fetch blobs”, “Stitch blobs”, “Recovery Fix”
• iBooks fixed in 5.0 and 5.0.1.  This is a targeted fix that doesn’t remove entire sandbox mechanism.  5.x users already using redsn0w “Just Boot” can just use the new version without redoing entire jailbreak again
• 3GS old-bootrom owners can now create custom IPSWs without blobs
• ultrasn0w compatability update (i.e. same baseband requirements) for 5.0.1 will be available on Cydia Monday
• support for newer 8GB iPhone4 (which until now had problems with “Fetch blobs”).  Thanks to @JKjeepnJeff for loaning us one of these newer i4 units for testing!
• allows Windows users (not just OS X users) to use the “Custom” button to create IPSWs without baseband updates.  (Update: please wait for 0.9.9b9b for this!)
• accommodates APTickets in 5.x (until next Apple countermove).  APTickets are crypto-verified before submitting to Cydia, just like the main blobs.  Cydia server support for sending back the APTickets is upcoming.  For now, use stitched IPSWs for 5.x.  Due to APTickets, stitched 5.x IPSWs now require user to start in “Pwned DFU” mode
• Support added for stitching 4.x blobs to iPad2-GSM IPSWs.  Similar to @notcom’s TinyCFW but doesn’t require lots of RAM or a TSS-assisted restore. Won’t work for iPad2 5.x blobs (or iPhone4S at all) until a bootrom-level exploit is out
• top line now shows whether (and where) a redsn0w update is available, or if the version being run is the latest.  Uses DNS TXT record to alleviate any concerns about snooping
• no 5.1 beta support at this time (major apps like Cydia are not yet compatible)
• @pod2g has been doing a great job porting his 5.x untether…check his blog for updates!
• Owners of newer 3GS iPhones must not flash the iPad baseband.  The iPad baseband will not work on 3GS iPhones built later than 2011 week 35.  You have a week 35 or later device if your serial # starts with xx135.

Update #17b: Version 0.9.9b9b enables the “Custom” button for Windows users, and make the 3GS week 35 warning a more explicit part of the process.

You can download RedSn0w 0.9.9b9b here.

UPDATE: redsn0w updated to redsn0w 0.9.9b9d.

UPDATE: official ultrasn0w with iOS 5.0.1 released!

This tutorial is for those users of locked iPhone 3GS and iPhone 4, who updated to iOS 5.0.1 and realized that ultrasn0w unlock doesn’t work there.

Indeed DevTeam have not updated software unlock utility ultrasn0w to work with the latest iOS 5.0.1. There are two workarounds, that will make ultrasn0w work on 5.0.1.

Read the rest of this entry »

iH8Sn0w has released Sn0wBreeze 2.8b11 with support of recently released iOS 5.0.1 firmware.

As usual the jailbreak is semi-tethered for iPhone 4, iPad, iPhone 3GS with new bootrom, iPad Touch 3G, iPod Touch 4G and untethered for iPhone 3GS with old bootrom.

Sn0wBreeze 2.8b11 will create a custom firmware with jailbreak and preserve modem version for unlock. Unlockers will also be able to flash 06.15 iPad modem for unlock.

You can download Sn0wBreeze 2.8b11 here.

Here are our step-by-step tutorials that will guide you through all the process of jailbreaking iOS 5.0.1 with sn0wbreeze 2.8b11:

• iPhone 4
• iPhone 3GS
• iPad 1
• iPod Touch 3G
• iPod Touch 4G

Other tutorials are available here.

The iPhone Dev-Team has released an update to their UltraSn0w unlock bringing support for iOS 5. Remember that NO new basebands are supported in this release. It only adds support for iOS 5 with old basebands.

Here is the list of supported basebands:

• iPhone 4: 01.59.00
• iPhone 3G/3GS: 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

If have one of the above baseband version and need unlock you can upgrade to iOS 5 without updating your baseband using RedSn0w 0.9.9b5.

Ultrasn0w 1.2.4 is available in Cydia.

We’ve updated ultrasn0w to be compatible with iOS5, which came out a few days ago. While ultrasn0w 1.2.4 (available now in Cydia) doesn’t add support for any new basebands, the update is required for any ultrasn0w unlockers trying out iOS5 (it remains backwards compatible though, so you should be able to use it no matter what firmware you have).

The supported basebands for the iPhone 3G and 3GS are 04.26.08, 05.11.07, 05.12.01, 05.13.04, and 06.15.00. The baseband supported for the iPhone4 is 01.59.00.

Remember, the only way to get to iOS5 while preserving your ultrasn0w-compatible baseband is by using a custom IPSW. redsn0w now has the ability to create such a custom IPSW for you (at least on Macs…the same capability for Windows will be coming soon).

The majority of people who use ultrasn0w at iOS5 right now will probably be those with old-bootrom iPhone3GS devices, since they already have an untethered jailbreak via redsn0w. For everyone else, the iOS5 jailbreak is currently tethered and you need to “Just boot” tethered with redsn0w every time your phone reboots. That’s not always easy to do if your phone reboots while away from home!

Note: there’s a special “trick” that iPhone3GS owners with baseband 06.15 need for iOS5. During the new setup screens you see when you start iOS5 for the first time, you’ll be asked about Location Services. Be sure to select “Disable Location Services” when asked! Later on in the setup, you’ll have the chance to turn on Location Services again when asked if you want to use “Find my iPhone”. It’s fine to turn it back on at that point, if that’s your desire (or you can always go in and enable it in Settings.app).

Also, some iPhone3GS users with the 06.15 baseband may have tried to install iOS5 using a stock IPSW (even though you should never ever try to use a stock IPSW if you’re an ultrasn0w unlocker). If you did try this, your baseband is probably in an inconsistent state, and you’ll need to reflash the 06.15 baseband again (using redsn0w). Be very careful if you use redsn0w to reflash the iPad baseband — don’t interrupt the process! And please avoid using stock IPSWs in the future Unlockers should never go near stock IPSWs.

iH8sn0w updated their iOS 4.3.1 untethered jailbreak utility – released Sn0wBreeze 2.5.1.

They have added

• Apple TV 2G support,
• Cydia 1.1.1,
• ability to use 06.15 baseband for iPhone 3GS,
• afc2 (to use ifunbox and iphone explorer)
• fixed some bugs

Sn0wBreeze is used to create custom firmwares with jailbreak and preserve iPhone baseband. It is available for Windows only.

You can download Sn0wBreeze 2.5.1 here.

Here’ official changelog.

————————————————————————-
sn0wbreeze 2.5.1 Change-log:
————————————————————————-
* Cydia 1.1.1 is now pre-installed.
* iPhone 3GS users can now flash the iPad 06.15.00 baseband.
* Animate (Animated Boot Logos) by the Chronic Dev-Team is now supported.
* Added afc2
* Apple TV 2 is now fully supported.
* Added Apple TV 2 DFU Instructions.
* YouTube issues resolved on hacktivated devices.
* iPhone 3GS old-bootrom issues fixed (Error 37).
————————————————————————-
ULTRASN0W USERS:
————————————————————————-
There is a temp. fix available on Pushfix’s Cydia repo (http://cydia.pushfix.info)
for getting ultrasn0w to work on preserved basebands on 4.3.1.
[It does not fix the iPhone 4 single bar issue though!]
————————————————————————-

John Savio created a very amazing costume for Halloween, which looks like a real iPhone 4, but 10 times larger than the original. It is thin, has rounded corners, LED light on the back as a flash and even touchscreen. The costume was created from 40″ LED LCD Panel used as the smartphone’s screen. It is powered by two car batteries and run by Jailbroken iPhone 4, weighs roughly 75 lbs. The process of costume’s creation took about 40 hours to complete.