Jailbreak iPhone, iPod Touch, iPad

iH8Sn0w released Sn0wBreeze 2.9.13 that still supports untethered jailbreak of iOS 6.1.2. Version 2.9.13 fixes several issues and bugs found in earlier sn0wbreeze releases.

Sn0wbreeze 2.9.13 supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock. It can also be used to upgrade iPhone 3GS modem version to 06.15.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

Our step-by-step tutorials:

• iPhone 4
• iPhone 3GS

What is New?

• 2.9.13: Ugh. More rootfs bug fixes.
• 2.9.12: Finally fully fixed iPhone3,2 limera1n payload injection issues.
• 2.9.12: Fixed root filesystem partition re-sizing issues on 5.x.x/6.x.x.= (again :p).
• 2.9.11: Fixed bug with Cydia having “compatibility-issues” with the untether package on 6.1.2.
• 2.9.10: Added Apple TV 2 iOS 5.2 sandbox fix. (thanks @nitoTV!)
• 2.9.10: Added iOS 6.1.2 support for 3GS/A4 devices (as usual).
• 2.9.9: Fixed issue with device not showing up in iTunes/xcode.
• 2.9.9: Fixed bug when building iPhone3,2 (iPhone 4 GSM-Rev2) IPSW.
• 2.9.9: Apple TV 2 bug fixes.
• 2.9.9: Now adds evasi0n untether directly to Cydia (for future updates).
• Added 5.2/6.0.x/6.1 untethers provided by evad3rs
• Added iOS 6.1 support for iPhone 3GS, and A4 devices.
• Fixed Hacktivation issues on 6.0.x.
• Fixed some iFaith mode bugs.

iH8Sn0w released Sn0wBreeze 2.9.10 that brings support for untethered jailbreak of iOS 6.1.2. New version supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock. It can also be used to upgrade iPhone 3GS modem version to 06.15.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

Our step-by-step tutorials:

• iPhone 4
• iPhone 3GS

What is New?

iH8Sn0w released Sn0wBreeze 2.9.7 that brings support for tethered jailbreak of iOS 6.0.1. New version supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

What is New?
● Added 6.0 (10A403)/6.0.1 (10A523) support. (Only includes iPhone 3GS & A4 devices).
● The 6.0/6.0.1 is currently a tethered based jailbreak via iBooty (except for iPhone 3GS old bootrom users).
● SAM is built-in for iOS 6 hacktivations. (Hacktivated phones can reboot to a semi-tethered state after being activated [rather than just hang at the Apple Logo]). Kudos @sbingner!

Downgrading:
● Use iFaith mode after selecting/downloading the appropriate IPSW for your device. You will then be prompted to browse for SHSH blobs for the IPSW you have selected.
● Remember to enter a PWNED DFU state with sn0wbreeze’s iREB button in the top bar of sn0wbreeze prior to (SHIFT + Restoring) the custom signed IPSW!

iREB & iOS 6:
Due to some changes in iOS 6, the current public standalone version of iREB will NOT enter a proper PWNED DFU state for restoring to custom iOS 6 IPSWs. An update for the standalone version should come sometime this week. In the meantime, use the iREB tab located in sn0wbreeze’s top status bar to enter a proper PWNED DFU state.

A5(X)/A6(X) Support?:
As stated many times in the past, sn0wbreeze cannot be updated to work on A5(X)/A6(X) devices until a low level exploit in DFU or iBoot is found and made public.

A5(X)/A6(X) Baseband Preservation/Hacktivation?
For those running A5(X)/A6(X) devices and need to preserve your baseband, there is nothing you can do at the moment. For those wanting to hacktivate, the only advice I can give is to buy the carrier’s SIM (the one its locked to obviously) on ebay. The SIM does not have to be active with the carrier to activate the phone.

Known Bugs/Issues:
● Windows 8 users currently need to use this workaround to run sn0wbreeze.
● iPad baseband will fail to flash on iOS 4.0 –> iOS 4.2.1 restores.
● iPod Touch 2G 4.x.x restores fail.

iH8Sn0w released Sn0wBreeze 2.9.6. What’s new:

• Added 5.0.2/9B830 Apple TV 2 untether payload. (Thanks @planetbeing & @nitoTV)
• Apple TV 2 users can now resize their root partition.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

Sn0wbreeze 2.9.6 supports iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G, iPod Touch 4G and Apple TV 2G. It does not work with A5 devices, like iPad 2, iPad 3 and iPhone 4S.

You can download Sn0wBreeze 2.9.6 from here.

Our step-by-step tutorials for Sn0wBreeze 2.9.6 are available here:

• iPhone 4
• iPhone 3GS

Tutorials for jailbreak using Absinthe 2.0 are here.

You can find step-by-step instructions on how to jailbreak Apple TV 2G with Seas0nPass here (Windows, Mac OS).

The iPhone Dev-Team has released updates to RedSn0w and PwnageTool that bring support for the iOS 5.1.1 untethered jailbreak.

RedSn0w 0.9.12b1 supports untethered iOS 5.1.1 jailbreak for all devices:

• iPhone 3GS
• iPhone 4
• iPhone 4S
• iPad 1
• iPad 2
• new iPad 3
• iPod Touch 3G
• iPod Touch 4G

PwnageTool 5.1.1 allows to create custom firmware and preserve modem version for unlock with ultrasn0w or Gevey. PwnageTool 5.1.1 supports all A4 devices:

• iPhone 3GS
• iPhone 4
• iPad 1
• iPod Touch 3G
• iPod Touch 4G
• Apple TV 2G

You can download RedSn0w 0.9.12b1 here and PwnageTool 5.1.1 here.

iOS 5.1.1 untethered jailbreak tutorial using Redsn0w is available here.

Official DevTeam comments:

RedSn0w
redsn0w allows owners of A4+earlier devices to install rocky-racoon two different ways:

• backup/restore method similar to Absinthe and cinject
• its traditional limera1n-based ramdisk install. If you have a lot of media on your A4 device (music, movies, TV shows, etc), then the ramdisk method is preferrred because it avoids any possibility of later problems related to syncing to iCloud (including Photo Stream and Music Match). The ramdisk method is not available for A5 devices or later because limera1n can’t be used. If you’d like to use redsn0w’s ramdisk method, just be sure to put the A4 device in DFU or Recovery mode before starting redsn0w (otherwise it will immediately start to use the backup/restore method).

We’ve also added a new redsn0w feature specifically for those who got in on the SAM unlock: you can now include your SAM tickets as part of your initial ramdisk jailbreak of iPhone4 or earlier, or alternatively you can upload your SAM tickets to any device after its been jailbroken. redsn0w accepts either the individual SAM activation ticket plist file, or the entire zip file created by redsn0w’s “Backup” button. As usual, redsn0w continues to cover all of its previous jailbreaks and untethers (so redsn0w-0.9.12b1 covers everything from 5.1.1 all the way back to 4.1).

PwnageTool
PwnageTool also avoids any possible sync issues, but again it applies only to A4+earlier devices. If you unlock your iPhone with ultrasn0w or a commercial method, you must use PwnageTool to avoid updating your baseband otherwise you’ll lose the unlock. PwnageTool will also jailbreak+untether the AppleTV2,1 5.0_2B206f (unless you customize the IPSW further, you’ll have just basic SSH access to the device).

iH8Sn0w released Sn0wBreeze 2.9.5. What’s new:

• Added 5.1.1/9B208 untether payload for the iPhone 4 GSM.
• Added iPhone 3GS (iPad Baseband users) location services fix.

Just like version 2.9.4 the new 2.9.5 version supports untethered jailbreak of A4 devices on iOS 5.1.1. Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

Sn0wbreeze 2.9.5 supports iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G, iPod Touch 4G and Apple TV 2G. It does not work with A5 devices, like iPad 2, iPad 3 and iPhone 4S.

You can download Sn0wBreeze 2.9.5 from here.

Our step-by-step tutorials for Sn0wBreeze 2.9.5 are available here:

• iPhone 4
• iPhone 3GS

iH8Sn0w released Sn0wBreeze 2.9.4 with the ability to perform an untethered jailbreak of A4 devices on iOS 5.1.1. Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

Sn0wbreeze 2.9.4 supports iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G, iPod Touch 4G and Apple TV 2G. It does not work with A5 devices, like iPad 2, iPad 3 and iPhone 4S.

You can download Sn0wBreeze 2.9.4 from here.

Our step-by-step tutorials for Sn0wBreeze 2.9.5 are available here:

• iPhone 4
• iPhone 3GS

UPDATE: Tutorials for iOS 5.1.1 can be found here.

Here are our step-by-step tutorials that will guide you through all the process of jailbreaking iOS 5.1 with redsn0w and sn0wbreeze:

iPhone 4

Tethered jailbreak iOS 5.1:

• RedSn0w (Windows)
• Custom firmware and jailbreak using Sn0wBreeze (Windows)

iPhone 3GS

(Un)Tethered jailbreak iOS 5.1

• RedSn0w (Windows)
• Custom firmware and jailbreak using Sn0wBreeze (Windows)

Read the rest of this entry »

iH8sn0w has released new version of popular jailbreak utility Sn0wBreeze 2.9.3.

What is New?

• Added Apple TV 2 support for iOS 4.4.3/4.4.4.
• Fixed rare issues with iOS 5.0.1 where it would halt on the Apple upon boot.

Just adding this in mainly for users who dumped their SHSH blobs. On the initial boot, the Apple TV may have a black screen for 60 seconds after setting up the Apple TV. This is normal.

You can download Sn0wBreeze 2.9.3 here.

iH8sn0w has released new version of popular jailbreak utility Sn0wBreeze 2.9.2. Sn0wbreeze is used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock. New version 2.9 adds support for untethered iOS 5.0.1 jailbreak as well as support for all firmwares supported by previous versions of sn0wbreeze.

Version 2.9.2 features tethered iOS 5.1 jailbreak for iPhone 3GS, iPhone 4, iPad 1, iPod Touch 2G, iPod Touch 3G and iPod Touch 4G.

You can download Sn0wBreeze 2.9.2 here.

Unlockers should update only via custom firmware. Ultrasn0w for iOS 5.1 with old basebands will be released soon.