Jailbreak iPhone, iPod Touch, iPad

Many iPhone 3G users would like to use internet on a desktop or notebook through their phone. There were several solutions: iPhoneModem, NetShare, 3Proxy.. they all used SSH and SOCKS proxy. One of the working ones was described here get internet on a desktop or notebook through IPhone 3G.

Couple days ago PdaNet (fullname is PdaNet WiFi Router) was ported to iPhone. Now our life is much much easier.

What you need is a jailbreaked iPhone with Cydia installer. Then install PdaNet.

All you need to do is simply to create an ad-hoc WiFi network on the computer and connect your iPhone to it (instructions). Your computer then goes online automatically. There is no need to specify IP (or any other) settings on either end.

Some nice features:

• You will get FULL Internet access on the computer! (Instead of only applications that support Socks proxy.) In technical terms, all applications make direct TCP/IP connections to the server. Since there is no proxy involved, that also means less problems and less delays.
• You don’t need to configure anything on the computer end whenever you connect PdaNet. No proxy settings, no extra software installation, no messing with static IP assignment, no switching settings back and forth when going back to your home’s WiFi router.
• Yes it will connect at 3G speed if your phone has the coverage.
• Supports PC, MAC, Linux or anything (include other PDA/phones) that connects to a WiFi router.
• PdaNet runs in the background so you can still use other iPhone features when PdaNet is connected. But when you are done with them, go back to PdaNet to prevent the phone from entering idle and drops your connection.
• To turn off the phone screen when using PdaNet, just cover the upper part of the phone (or simply flip the phone upside down). This will conserve your battery.
• It is recommended that you charge the phone at the same time while using PdaNet, because both WiFi and 3G will be put on full speed, both consume a lot of juice.

One last note: over-usage of PdaNet’s tethering is likely to draw the eye and the ire of AT&T (if you use this provider), so use with care!

Firmware 2.2 beta 1 appeared just a day ago. It seems that DevTeam never sleeps They published a screenshot of jailbreaked iPhone 2G with this new firmware:

It runs Terminal.app (non-apple application) running on 2.2b1 firmware. Thay say that version 2.2 is still vulnerable to pwnage and quickpwn on everything but iPod Touch 2G.

No news about software unlock for iPhone 3G or jailbreak for iPod Touch 2G.

Congratulations, Windows users. The support for new firmware 2.1 is added. So here is what you can do:

• Support for FW v2.0.1, v2.0.2, v2.1.0
• Jailbreaking and Pwning iPhone 2G, iPhone 3G and iPod Touch
• Adding Cydia and Installer
• Replacing boot logos
• Unlocking iPhone 2G

Changes from QuickPwn RC3

• Support for firmware 2.1
• Auto-detection of firmware version, insistence on correct firmware bundle to prevent user epic fail.
• Use of iASign to activate to prevent bspatch epic fail.
• Removed buggy and never really tested 2.0 support

Sorry, no jailbreak for new iPod Touch and no unlock for iPhone 3G.

Here are download links:

• Torrent
• http://www.technoh.net/forums/Downloads/QuickPwn/QuickPwn21-1.zip
• http://i.omerc.net/QuickPwn21-1.zip
• http://download.s1.christophertran.net/devteam/quickpwn/2.1/QuickPwn21-1.zip

Firmwares v2.1: 2g firmware, 3g firmware

Related posts:

• QuickPwn and PwnageTool for 2.1 firmware
• QuickPwn, PwnageTool and WinPwn

I was amazed that very few people know how to turn auto-correction off. Here is what you need:

• Jailbreak your iPhone and install Cydia
• Install BossPrefs
• Install CToggle BossPrefs Addon
• Run BossPrefs and turn auto-correction off

There is even a domain: http://please-let-us-disable-autocorrection-steve.com.. Nice.

DevTeam published first screenshot about their procress of hacking (jailbreaking, pwning) new iPod Touch. New device has new hardware, that might be used in future iPhones. The DevTeam work just started, so the fun part is coming.

It is recommended that you all hold off jailbreaking 2.1. There are many issues that dev team is working through. A jailbreak isn’t quite enough.

Many apps are not yet stable. Categories will not work because we cannot launch one app from another at this time. Cydia is not yet stable. I recommend you wait a day or two still.

The iPhone 2.1 is out. It contains the following updates as listed by Apple:

- decrease in call set-up failures andcall drops
- significantly improve battery life for most users
- dramatically reduced time to backup to iTunes
- improve email reliability, notable fetching email from POP and Exchange accounts
- faster installation of 3rd party applications
- fixed bugs causing hangs and crashes if you have lots of 3rd party applications
- improved performance of text messaging
- faster loading and searching of contacts
- improved accuracy of the 3G signal strength display
- repeat alert up to two additional times for incoming text messages
- option to wipe data after ten failed passcode attempts
- Genius playlist creation

The 2.1 firmware is build 5F136 (weighing in at 237.8MB) and can be directly downloaded through iTunes. The new firmware also contains a number of security fixes including the well publicized passcode flaw.

Jailbreak for 2.1 is not avaliable yet.

The only way Apple can fix the exploit that the iPhone Dev Team has been using to Jailbreak iPhone’s and iPod Touch’s is to fix their hardware, but it seems Apple has figured out a way to program iTunes 8 to detect and prevent the Pwnage exploit. The screenshot below from iTunes 8 using a Pwned ipsw (with an unPwned device attached) is one example.

The Dev Team reacted promptly:

“The nice thing about iTunes decisions is that we can provide you with patches to counter them. We have one such patch already for Mac iTunes 8 for iPod touch. We’ll be working out the full suite of patches for all the combinations over the next week.”

Dev Team also published two interesting screenshots:

There are so many tools, some for Mac OS, others for Windows, different versions… Complicated. So let’s summerize a little bit.

If you have iPhone 3G, you’ll be able to install 3-rd party non AppStore applications (through separate applications called Cydia and Installer) and run these applications. If you have old iPhone, in addition to that you’ll be able to unlock the device (use with any carrier).

There are two methods: quickpwn and custom firmware method. First one is for quikly pwning and jailbreaking  the device without restore. You should use it if you have unlocked device or an AT&T contract.

If you are Windows user:

• Go for WinPwn. The current version is 2.5.0.2 (also called 2.5 beta-2). Download here. It supports both iPhone and iPhone 3G, firmwares 2.0, 2.0.1, 2.0.2. You can use either quickpwn or custom firmware method.
• There is a separate QuickPwn tool for Windows. The current version is RC3. Download here. Do you need it? Yes, if you want to quick pwn and you do not like WinPwn (or you had problems with it).

If you’re using Mac OS:

• Go for PwnageTool. The current version is 2.0.3.1. Download here. Works with 2.0, 2.0.1, 2.0.2 firmwares using custom-firmware method.
• There is a version of QuickPwn tool for MAC OS. The current version is 1.0.0. Download here. It works only with firmware 2.0.2. Do you need it? Yes, if you want to quick pwn.
  QuickPwn is not a replacement for PwnageTool, they are different tools and provide different features, QuickPwn is for quickly pwning a device, whereas PwnageTool is designed to custom build and tailor the ipsw production process, both tools will be actively developed in the future.

Recently a new project has been started, called XiPhone. It will be based on XPWN. So functionality similar to WinPwn and Pwnage will be present (jailbreak, unlock, etc). In addition to that developers plan to include:

• Auto downloading of stock firmware files from apple’s site (no need to hunt for it then select it)
• Wizard based modern GUI (created with .net 2.0), and Vista Style UI.
• Export of firmware settings so users can pass around an XML file which contains a configuration that works for them.
• Auto updates to the XiPhone software.
• Community based wallpapers used for Bootscreen, Restore screen and others
• Enabling / Disabling of options available based on the device you select.

Unfortunately, only Windows platform users will be able to use XiPhone.