App | Jailbreak iPhone, iPod Touch, iPad - Part 8 Skip to content

Jailbreak iPhone, iPod Touch, iPad

новости про джейлбрейк iPhone, iPod Touch и iPad

Archive

Tag: app

redsn0w 0915b2 313x400 DevTeam released RedSn0w 0.9.15b2

The iPhone Dev-Team has updated RedSn0w 0.9.15 with some bug fixes for iPhone 3GS and iPad owners.

Version 0.9.15b2 fixes a few issues for 3GS owners: old-bootrom awesomeness is no longer forgotten directly after a restore, and iPad baseband upgrade/downgrade support is fixed (same production date cutoffs apply!). If your 3GS is currently tethered at 6.0 even though you have an old bootrom, just re-run redsn0w’s Jailbreak step (no need to restore). Don’t forget you can add some pizzaz with your own boot logo or a nerdy verbose boot.

Redsn0w 0.9.15 brought gives us possibility to do iOS 6 jailbreak and different downgrade options.

You can download RedSn0w 0.9.15b2 here.

redsn0w ios6 313x400 Tethered iOS 6 jailbreak released

The iPhone Dev-Team has announced RedSn0w 0.9.15b1 which brings numerous new features including iOS 6 jailbreak for old devices, ability to restore to older firmware, manipulating SHSH blobs and etc.

iOS 6 jailbrak is tethered for iPhone 4, iPhone 3GS and iPod Touch 4G, untethered only for old iPhone 3GS with old bootrom. Tethered jailbreak means that each time you restart your device you will need to connect it to a computer and run redsn0w.

iPhone 4S, iPhone 5, iPad 2 and iPad 3 are not supported.

We will create our step-by-step tutorials soon.

You can download RedSn0w 0.9.15b1 here.

According to 9to5Mac, a Russian hacker has published a relatively simple method that allows users to obtain in-app purchases from many iOS apps for free.

The method, which doesn’t require a jailbreak, involves installation of two certificates on the user’s iOS device and changing DNS entry in wi-fi settings. Then users can perform purchases of in-app content as usual.




Read the rest of this entry »

redsn0w 0914b2 295x400 RedSn0w 0.9.14b2 improves 06.15 downgrade for iPhone 3GS/3G

The iPhone Dev-Team released RedSn0w 0.9.14b2 with improved algorithm for baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b2 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04. With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before). This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

The revised steps are:

  1. Connect your iPhone in normal mode, then click “Jailbreak” after redsn0w identifies its model and BB version (you needn’t pre-select the IPSW anymore).
  2. Choose the “Downgrade from iPad baseband” option (you needn’t worry about de-selecting Cydia anymore).
  3. Do a controlled “slide to power off” shutdown of your phone and proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step. THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running. Please just let it be for the next 3-8 minutes! When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners. The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

Redsn0w 0.9.13dev2 313x400 iPhone Dev Team Releases Redsn0w 0.9.13dev2

The iPhone Dev-Team has released an update to iOS 6 jailbreakRedSn0w 0.9.13dev2. New version resolves problems with SSH.

The “dev2″ version should fix the various SSH problems and crashes with apps that some have been seeing.

You can download the latest version of RedSn0w from here.

redsn0w 0914b1 313x400 RedSn0w 0.9.14b1 Released: 06.15 Downgrade for iPhone 3GS/3G

The iPhone Dev-Team released RedSn0w 0.9.14b1 that can perform a baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b1 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04.  With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before).  This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

Here are the steps:

  1. Use the “Extras->Select IPSW” button in redsn0w to tell it which firmware version you have installed (new-bootrom 3GS users can usually skip this step but it doesn’t hurt for them to do it too).
  2. Do a controlled shutdown of your iPhone (“slide to power off”).  This step is very important to avoid mount problems when the ramdisk is running!
  3. Go back to the first screen and click “Jailbreak”.  Enable the “Downgrade from iPad baseband” checkbox, disable Cydia if you already have it installed, and click Next to proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step.  THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running.  Please just let it be for the next 3-8 minutes!  When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners.  The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later.  If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone!  Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

ios6 jailbreak1 313x400 iOS 6 jailbreak released for iPhone 3GS, iPhone 4, iPod 4G

The iPhone Dev-Team has released a tethered jailbreak of iOS 6 for the iPhone 3GS, iPhone 4, and iPod touch 4G.

Just like at the at the wind-down of last year’s WWDC, we’re releasing a developer-only version of a redsn0w tethered jailbreak for app developers.

Supported Devices:

  • iPod touch 4G
  • iPhone3GS
  • iPhone4 (GSM)
  • iPhone4 (CDMA)

You can download the latest version of RedSn0w from here:

DevTeam comments are available here.

jailbreak iOS 5.1.1 500x263 Tutorials for iOS 5.1.1 untethered jailbreak

Here are our step-by-step tutorials that will guide you through all the process of untether jailbreaking iOS 5.1.1 with absinthe, redsn0w and sn0wbreeze:

iphone4s Tutorials for iOS 5.1.1 untethered jailbreak iPhone 4S

UnTethered jailbreak iOS 5.1.1

iphone 4 s Tutorials for iOS 5.1.1 untethered jailbreak iPhone 4

UnTethered jailbreak iOS 5.1.1


Read the rest of this entry »

redsn0w 0912b2 main 325x400 RedSn0w 0.9.12b2: minor update and bugfixes

The iPhone Dev-Team has released RedSn0w 0.9.12b2. New version has some bugfixes and additional question about jailbreak mode for A4 devices.

Redsn0w allows owners of A4+earlier devices to install rocky-racoon two different ways:

  • Backup/restore method similar to Absinthe and cinject.
  • Traditional limera1n-based ramdisk install. It is much faster, especially for users with lot’s music, movies, apps on the device.

Redsn0w 0.9.12b2 will ask owners of iPhone 3GS, iPhone 4, iPod Touch 3G, iPod Touch 4G and iPad 1 what jailbreak mode they would like to use.

redsn0w0912b2 499x318 RedSn0w 0.9.12b2: minor update and bugfixes

Starting with version 0.9.12b2, redsn0w will now explicitly ask users with limera1n-able devices whether they want to inject rocky-racoon using the DFU ramdisk method or the backup/restore method (the ramdisk method is better for those with lots of media on their device that would create very large backups, and it’s required for those with unactivated iPhones). If you’ll always want to use limera1n, you can select that in the Preferences pane. It also fixes an iBooks issue on old-bootrom 3GS iPhones, and provides more useful error messages when things go wrong.

RedSn0w 0.9.12b2 supports untethered iOS 5.1.1 jailbreak for all devices:

  • iPhone 3GS
  • iPhone 4
  • iPhone 4S
  • iPad 1
  • iPad 2
  • new iPad 3
  • iPod Touch 3G
  • iPod Touch 4G

You can download RedSn0w 0.9.12b2 here.

iOS 5.1.1 untethered jailbreak tutorial using Redsn0w is available here.

sn0wbreeze 296 500x397 Sn0wBreeze 2.9.6 released: added Apple TV 2G iOS 5.0.2 9B830 support

iH8Sn0w released Sn0wBreeze 2.9.6. What’s new:

  • Added 5.0.2/9B830 Apple TV 2 untether payload. (Thanks @planetbeing & @nitoTV)
  • Apple TV 2 users can now resize their root partition.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

Sn0wbreeze 2.9.6 supports iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G, iPod Touch 4G and Apple TV 2G. It does not work with A5 devices, like iPad 2, iPad 3 and iPhone 4S.

You can download Sn0wBreeze 2.9.6 from here.

Our step-by-step tutorials for Sn0wBreeze 2.9.6 are available here:

Tutorials for jailbreak using Absinthe 2.0 are here.

You can find step-by-step instructions on how to jailbreak Apple TV 2G with Seas0nPass here (Windows, Mac OS).

sn0wbreeze 296 aooletv2g 500x397 Sn0wBreeze 2.9.6 released: added Apple TV 2G iOS 5.0.2 9B830 support