Installer | Jailbreak iPhone, iPod Touch, iPad - Part 3 Skip to content

Jailbreak iPhone, iPod Touch, iPad

новости про джейлбрейк iPhone, iPod Touch и iPad

Archive

Tag: Installer

Many iPhone 3G users would like to use internet on a desktop or notebook through their phone. There were several solutions: iPhoneModem, NetShare, 3Proxy.. they all used SSH and SOCKS proxy. One of the working ones was described here get internet on a desktop or notebook through IPhone 3G.

Couple days ago PdaNet (fullname is PdaNet WiFi Router) was ported to iPhone. Now our life is much much easier.

pdanet Connect desktop or notebook to internet through iPhone 3G

What you need is a jailbreaked iPhone with Cydia installer. Then install PdaNet.

All you need to do is simply to create an ad-hoc WiFi network on the computer and connect your iPhone to it (instructions). Your computer then goes online automatically. There is no need to specify IP (or any other) settings on either end.

Some nice features:

  • You will get FULL Internet access on the computer! (Instead of only applications that support Socks proxy.) In technical terms, all applications make direct TCP/IP connections to the server. Since there is no proxy involved, that also means less problems and less delays.
  • You don’t need to configure anything on the computer end whenever you connect PdaNet. No proxy settings, no extra software installation, no messing with static IP assignment, no switching settings back and forth when going back to your home’s WiFi router.
  • Yes it will connect at 3G speed if your phone has the coverage.
  • Supports PC, MAC, Linux or anything (include other PDA/phones) that connects to a WiFi router.
  • PdaNet runs in the background so you can still use other iPhone features when PdaNet is connected. But when you are done with them, go back to PdaNet to prevent the phone from entering idle and drops your connection.
  • To turn off the phone screen when using PdaNet, just cover the upper part of the phone (or simply flip the phone upside down). This will conserve your battery.
  • It is recommended that you charge the phone at the same time while using PdaNet, because both WiFi and 3G will be put on full speed, both consume a lot of juice.

One last note: over-usage of PdaNet’s tethering is likely to draw the eye and the ire of AT&T (if you use this provider), so use with care!

quickpwn21 QuickPwn 2.1 for Windows is ready

Congratulations, Windows users. The support for new firmware 2.1 is added. So here is what you can do:

  • Support for FW v2.0.1, v2.0.2, v2.1.0
  • Jailbreaking and Pwning iPhone 2G, iPhone 3G and iPod Touch
  • Adding Cydia and Installer
  • Replacing boot logos
  • Unlocking iPhone 2G

Changes from QuickPwn RC3

  • Support for firmware 2.1
  • Auto-detection of firmware version, insistence on correct firmware bundle to prevent user epic fail.
  • Use of iASign to activate to prevent bspatch epic fail.
  • Removed buggy and never really tested 2.0 support

Sorry, no jailbreak for new iPod Touch and no unlock for iPhone 3G.

Here are download links:

Firmwares v2.1: 2g firmware, 3g firmware

Related posts:

math1 QuickPwn, PwnageTool and WinPwn

There are so many tools, some for Mac OS, others for Windows, different versions… Complicated. So let’s summerize a little bit.

If you have iPhone 3G, you’ll be able to install 3-rd party non AppStore applications (through separate applications called Cydia and Installer) and run these applications. If you have old iPhone, in addition to that you’ll be able to unlock the device (use with any carrier).

There are two methods: quickpwn and custom firmware method. First one is for quikly pwning and jailbreaking  the device without restore. You should use it if you have unlocked device or an AT&T contract.

If you are Windows user:

  • Go for WinPwn. The current version is 2.5.0.2 (also called 2.5 beta-2). Download here. It supports both iPhone and iPhone 3G, firmwares 2.0, 2.0.1, 2.0.2. You can use either quickpwn or custom firmware method.
  • There is a separate QuickPwn tool for Windows. The current version is RC3. Download here. Do you need it? Yes, if you want to quick pwn and you do not like WinPwn (or you had problems with it).

If you’re using Mac OS:

  • Go for PwnageTool. The current version is 2.0.3.1. Download here. Works with 2.0, 2.0.1, 2.0.2 firmwares using custom-firmware method.
  • There is a version of QuickPwn tool for MAC OS. The current version is 1.0.0. Download here. It works only with firmware 2.0.2. Do you need it? Yes, if you want to quick pwn.
    QuickPwn is not a replacement for PwnageTool, they are different tools and provide different features, QuickPwn is for quickly pwning a device, whereas PwnageTool is designed to custom build and tailor the ipsw production process, both tools will be actively developed in the future.

    winpwn25 install WinPwn 2.5.0.2

    This is the most famous Windows-based utility to jailbreak and unlock Apple’s iPhone and iTouch.

    Release notes:

    • The new nice interface
    • Very very very easy to use
    • QuickPwn Support for firmwares 2.0/2.0.1/2.0.2
    • Root partition resize support
    • Installer support
    • Basic / Expert modes
    • Wizard style interface
    • Automatic updater
    • Support for WinXP and Vista 32/64bit.

    Notes:

    • Why is it beta? It’s just the saying.. Use at your own risk
    • You MUST do a full uninstall of winpwn before installing the new version
    • Make sure you have the latest version of iTunes (7.7 and above)

    Bug fixes

    • Crash when building ipsw
    • Quickpwn crash bug fix

    Download WinPwn 2.5.0.2: Rapidshare.com

    quickpwn12 QuickPwn updated to 1.2.0

    QuickPwn for Windows is updated. Support for all 2.x firmwares is added. So now you can QuickPwn and jailbreak the device if it is running 2.0, 2.0.1 or 2.0.2.

    DevTeam reminds that it is still beta software, so usual rules apply, no complaints if anything goes wrong and use the tool at at your own risk!

    Download here!

    Using QuickPwn does not update the firmware itself, this tool is designed to ‘Pwn’ (the ability to install future custom non-Apple firmwares) , ‘Jailbreak’ and install Installer and/or Cydia on a given device. If your device is running 2.0.1 and you QuickPwn it, it’ll still be running 2.0.1, although it will now be Pwned and Jailbroken. It will also activate (not unlock) devices that are being used outside of their intended territories and cannot be activated using iTunes.

    If you want to update to 2.0.2 then use the normal iTunes update to get to 2.0.2 and then use QuickPwn to Pwn, Jailbreak and Activate, remember that the 2.0.2 update includes a baseband update for the 3G iPhone, so depending what your long term intentions are for the phone, update wisely, of course in the upcoming PwnageTool application you’ll be able to create a custom ipsw without the baseband update enabled.

    PS: Mac OS version is on it’s way.

    PwnageTool 2.0.2 released just a day ago. And now WinPwn – iPhone jailbreaker and unlocker for windows is avaliable. The main new feature – it supports firmware 2.0.1.

    Download 2.0.0.4: [Rapidshare.com] [Rapidshare.de]

    Download firmwares: iPhone 1.1.4, 2.0, 2.0.1, iPhone 3G 2.0, 2.0.1

    winpwn2004 2 300x192 WinPwn 2.0.0.4 with support of 2.0.1 firmware

    2.0.0.4 features:

    • Support for both 1.1.4, 2.0, 2.0.1
    • Root partition resize support
    • Installer support
    • Support for WinXP and Vista 32/64bit.

    Notes are as usual:

    • You MUST do a full uninstall of winpwn before installing the new version
    • Make sure you have the latest version of iTunes (from 7.7)
    • WinPwn uses 300MB of ram at peak due to the ipsw being extracted in memory
    • You must first click browse and load an IPSW to use WinPwn (i thought this was clear)
    • For 2.0 only the *5A347_Restore.ipsw files are valid. The 345 image will not work
    • If you see Failed to load image catalog/payload catalog, this is fine and won’t cause problems
    • If you already have service with AT&T do not activate or install Youtube Fix
    • As usual jailbreak for iPhone and iPhone 3G, unlock only for iPhone.
    • It is recommended to use at least 550mb partition size to accommodate a space issue that causes some folks errors such as “the ipsw failed to create”.

    How to:

    1. First create a custom IPSW using the IPSW Builder (original are here: iPhone 1.1.4, 2.0, 2.0.1, iPhone 3G 2.0, 2.0.1).
    2. Bootloader Images: 3.9 and 4.6 in it here or here.
    3. Click “Ipwner” and browse for the custom IPSW that you just created. This will pwn itunes and allow you to flash
    4. Custom IPSW files via DFU mode
    5. Once you have pwned Itunes, put your phone into DFU mode. If you don’t know how to do this click Here.
    6. Once you are in DFU mode Itunes will pop up and then you can hold shift and click restore and browse to your custom IPSW file.

    pwnage PwnageTool 2.0.2 is avaliable

    PwnageTool 2.0.2 is out. It will support new firmware 2.0.1. It will jailbreak and unlock the old iPhone and jailbreak new iPhone 3G. Here are the download links:

    Installer 4 Beta is included, it is added in any mode by default.  The main installer package management interface within PwnageTool isn’t enabled yet, and will report that installer.app isn’t available, but the actual Installer.app package is added as a default option in both modes.

    The latest Cydia is also enabled by default. We recommend to use Cydia, not Installer.

    Bad news is that it is still not avaliable. DevTeam postponed their release. The good news is that version 2.0.2 will jailbreak 2.0.1 fimware (and unlock 2.0.1 for old iPhone) and have both Cydia and Installer 4 included. Stay tuned, the release will be in couple days.

    cydia20 1 Java for IPhone / IPhone 3G firmware 2.0 exists cydia20 2 Java for IPhone / IPhone 3G firmware 2.0 exists

    After successfull jailbreake of the IPhone/IPhone 3G with firmware 2.0 it is possible to install Cydia installer. And what is more exciting, there are many applications there, including Java.

    Related articles:

    screenshots are from iphoneapps.ru

    Our comments:

    5. No voice dialing

    There is do such feature. But.. There is an application called VoiceDial. For old jailbreaked IPhones it is possible to install via Installer. For the new IPhone 3G VoiceDial is avaliable through AppStore. By the way it is not free, cost is about $30.

    4. No cut and paste

    Indeed, not in IPhone or IPhone 3G for now. But, read this.

    3. Can’t use as a modem

    That is a problem. No such feature. And there will be no such feature in the future.

    UODATE: Get internet on a desktop or notebook through IPhone 3G

    2. No multimedia messaging

    There is an application called SwirlyMMS – works well. Costs $8, works well on old IPhones.

    1. Locked up

    Not only this. It is not possible to buy IPhone 3G without a contract. We’ll wait for an unlock and sells without a contract.