Jailbreak iPhone, iPod Touch, iPad

iH8Sn0w released Sn0wBreeze 2.9.10 that brings support for untethered jailbreak of iOS 6.1.2. New version supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock. It can also be used to upgrade iPhone 3GS modem version to 06.15.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

Our step-by-step tutorials:

• iPhone 4
• iPhone 3GS

What is New?

Apple has released iOS 6.1.2 to fix a bug with Microsoft Exchange Calendar.

Fixes an Exchange calendar bug that could result in increased network activity and reduced battery life.

Today’s update also fixes the passcode bug that was found last week. There is no information, whether this firmware is jailbreakable.

You can update via OTA or in iTunes. Jailbreakers have to perform restore to upgrade to iOS 6.1.2.

You can download the new firmware from here.

The Evad3rs Team have released an update to the Evasi0n jailbreak utility. Evasi0n 1.2 fixes timezone issue in evasi0n binary if client fails to correct it and disables OTA updates, which are not good for jailbroken devices.

If you’re already jailbroken – there is no need to rejailbreak, just run Cydia and install updates there. There is nothing in evasi0n 1.2 that is not already in Cydia.

You can download Evasi0n 1.2 here.

If you haven’t jailbroken yet, you can find the our step-by-step tutorials here:

• Windows
• Mac OS X

Hacker planetbeing corfirmed, that untethered iOS 6.1 jailbreak will be relaeased quite soon.

In terms of release date, we’re aiming for approximately a week out, but it’s possible it will come sooner or later than that.

You can upgrade if you want (I recommend iTunes backup and full restore) but there’s no reason to until jailbreak’s actually out.

Recently another hacker MuscleNerd tweeted, that utility might be released on Sunday.

This step-by-step tutorial will guide you through the process of full restore, that is highly recommended for iOS 6.1 jailbreak. You can use this tutorial for any iPhone, iPod Touch and iPad.

Important: do not update to iOS 6.1 if you need carrier unlock.

Step 1

Make a folder called “Firmware”. Download iOS 6.1 for your Apple device: here. 

We have downloaded iOS 6.1 for uour iPhone 4:

Step 2

Connect your device to the computer and launch iTunes. Make sure you have the latest iTunes installed.

Select your device from the list of devices on the left.In iTunes 11 to activate left panel press Ctrl+S.

Create a backup by right-clicking on the name in Devices (iTunes left pane) and choosing Back Up. In iTunes 11 you can click Back Up Now button.

Step 3

Now hold down Option (Mac) or Shift (Windows) key and click the Restore button.

Navigate to the Firmware folder and select the iOS 6.1 firmware ipsw. Click the Open button to continue.

After iOS update iTunes might ask if you want to setup your iPhone as a new device or restore from the backup.

Step 4

That’s it.

Pimskeks of the Evad3rs Dev-Team reveals that those looking to apply the new iOS 6.1 jailbreak should update to the firmware using iTunes.

If you people plan to upgrade to iOS 6.1 please don’t do an OTA upgrade. Please make a full restore using iTunes.

Just moments ago Planetbeing confirmed that their untethered jailbreak works with new iOS 6.1 final firmware released by Apple today and MuscleNerd hinted that the jailbreak will be released this Sunday.

MuscleNerd offers some insight as to why this is necessary, “a few reasons: OTA is more time consuming for us to test, and it gives you different SHSH blobs than normal restore.”

The iPhone Dev-Team has announced an updated version of RedSn0w and an upcoming update to UltraSn0w for iOS 6 compatibility.

Version 0.9.15b3 fixes the redsn0w “error 2601” that Windows users were seeing using the Restore button. It also fixes a related Windows iTunes error 14 for stitched files. Note that if you have a baseband, you should probably avoid stitching and simply use redsn0w’s native Restore (not iTunes).

Those lucky recipients of new iPad minis and iPad4s on Friday can use this redsn0w to save your 6.0 blobs off to Cydia. First connect your new device and turn it on, then use redsn0w’s Extras->SHSH Blobs->New and point it at the 6.0 IPSW.

Expect an ultrasn0w compatibility update for iOS 6.0 by Friday (mostly useful for 3GS old-bootrom users who are currently enjoying the untethered 6.0 jailbreak!). Same baseband support as with 5.x.

Thanks to @iamgolfy for helping test the 2601 Windows fix!

You can download the latest version of RedSn0w from here.

Here are recommendations from Chronic Dev Team:

1. Make a backup of your device in iTunes by right clicking on your device name under the ‘Devices’ menu and click ‘Back Up’.
2. Once your backup is complete return to your device and go to Settings – General – Reset – Erase all Content and Settings. This will make the jailbreak process much faster.
3. Open Absinthe and be sure you are still connected via USB cable to your computer.
4. Click ‘Jailbreak’ and wait…. just be patient and do not disconnect your device.
5. Once jailbroken return to iTunes and restore your backup from earlier. Right click on your device name under the ‘Devices’ menu in the left panel of iTunes and click ‘Restore from Back Up…’ then select the latest backup you created before. (restoring this backup will return all the content previously on your device ie, apps, photos, etc.)

Step-by-step tutorials are available here.

The iPhone Dev-Team has updated RedSn0w to jailbreak the iPhone 4S and iPad 2 on iOS 5.0.1.

Version 0.9.10b7 of redsn0w adds a collection of useful features: It finally implements the corona-A5 jailbreak for iPhone4S and iPad2 devices still at 5.0.1. It can also re-install that jailbreak for those who accidentally uninstalled the untether. When stitching an IPSW, it can now grab your blobs directly from Cydia. It now shows a lot more info about your device (for instance, whether your iPhone3G has the vulnerable baseband boot loader, or whether your iPhone3GS has the old exploitable bootrom. (And the next new feature to be added will be built-in restore support, to provide an alternative to iTunes restores.)

Previously you needed to use Absinthe to jailbreak the iPhone 4S and iPad 2.

You can download the new version of RedSn0w from here.

We will update our tutorials soon.

FireCore announced today that they have successfully jailbroken the Apple TV 2 with the latest iOS 5.1 (5.0). The jailbreak is tethered which requires the Apple TV to be connected to a Mac/PC when powering it on (each time).

Today we’re happy to release new versions of Seas0nPass and aTV Flash (black) that are compatible with latest 5.0 (iOS 5.1) software running on the ATV2.

What’s new in the 5.0 AppleTV software? Should I update?

• New interface: - Fast, visual access to all content choices
• Movie purchases in iCloud: Support for buying movies on Apple TV and playing back purchased movies from iCloud
• Genius Recommendations: Recommendations for content on the iTunes Store based on previous rentals and purchases
• Screensaver photos: New National Geographic photos built-in for screensaver
• On-device sign-up: On-device sign up for content partners on Apple TV using your Apple ID

Updating to the new 5.0 software is not required, and all aTV Flash (black) features will continue to be supported on AppleTV versions 4.2 and later.

What about the ATV3, will this work?

Unfortunately not. Work is still ongoing for the ATV3, and we hope to have more news soon. For the latest updates be sure to follow us on Twitter.

Which plugins are currently supported on 5.0?

• Couch Surfer (works)
• Last.fm (works)
• Maintenance (works)
• Media Player (works)
• NitoTV (works)
• RSS Feeds (works)
• Weather (works)
• Overflow (not working)
• Plex (not working)
• Remote HD (not working)
• Rowmote (not working)
• XBMC (not working)

Note: Non-working items require an author update for 5.0 compatibility.