Jailbreak iPhone, iPod Touch, iPad

iH8Sn0w released Sn0wBreeze 2.9.7 that brings support for tethered jailbreak of iOS 6.0.1. New version supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

What is New?
● Added 6.0 (10A403)/6.0.1 (10A523) support. (Only includes iPhone 3GS & A4 devices).
● The 6.0/6.0.1 is currently a tethered based jailbreak via iBooty (except for iPhone 3GS old bootrom users).
● SAM is built-in for iOS 6 hacktivations. (Hacktivated phones can reboot to a semi-tethered state after being activated [rather than just hang at the Apple Logo]). Kudos @sbingner!

Downgrading:
● Use iFaith mode after selecting/downloading the appropriate IPSW for your device. You will then be prompted to browse for SHSH blobs for the IPSW you have selected.
● Remember to enter a PWNED DFU state with sn0wbreeze’s iREB button in the top bar of sn0wbreeze prior to (SHIFT + Restoring) the custom signed IPSW!

iREB & iOS 6:
Due to some changes in iOS 6, the current public standalone version of iREB will NOT enter a proper PWNED DFU state for restoring to custom iOS 6 IPSWs. An update for the standalone version should come sometime this week. In the meantime, use the iREB tab located in sn0wbreeze’s top status bar to enter a proper PWNED DFU state.

A5(X)/A6(X) Support?:
As stated many times in the past, sn0wbreeze cannot be updated to work on A5(X)/A6(X) devices until a low level exploit in DFU or iBoot is found and made public.

A5(X)/A6(X) Baseband Preservation/Hacktivation?
For those running A5(X)/A6(X) devices and need to preserve your baseband, there is nothing you can do at the moment. For those wanting to hacktivate, the only advice I can give is to buy the carrier’s SIM (the one its locked to obviously) on ebay. The SIM does not have to be active with the carrier to activate the phone.

Known Bugs/Issues:
● Windows 8 users currently need to use this workaround to run sn0wbreeze.
● iPad baseband will fail to flash on iOS 4.0 –> iOS 4.2.1 restores.
● iPod Touch 2G 4.x.x restores fail.

Chpwn has posted an image showing Cydia running on a jailbroken iPad 4.

It doesn’t look any different than on the iPad (3rd generation), but here’s Cydia running on the iPad (4th generation): pic.twitter.com/zhrii6uX

Recently, MuscleNerd posted to show that the jailbreak discovered by chpwn was working for the iPad mini.

Last month, chpwn revealed that his jailbreak would be reserved as a failbreak. That means it will be limited to jailbreak developers and won’t be released to the public. This is being done to make it easier to discover new exploits (which will be used for public release) in the future.

The iPhone Dev-Team has announced an updated version of RedSn0w and an upcoming update to UltraSn0w for iOS 6 compatibility.

Version 0.9.15b3 fixes the redsn0w “error 2601” that Windows users were seeing using the Restore button. It also fixes a related Windows iTunes error 14 for stitched files. Note that if you have a baseband, you should probably avoid stitching and simply use redsn0w’s native Restore (not iTunes).

Those lucky recipients of new iPad minis and iPad4s on Friday can use this redsn0w to save your 6.0 blobs off to Cydia. First connect your new device and turn it on, then use redsn0w’s Extras->SHSH Blobs->New and point it at the 6.0 IPSW.

Expect an ultrasn0w compatibility update for iOS 6.0 by Friday (mostly useful for 3GS old-bootrom users who are currently enjoying the untethered 6.0 jailbreak!). Same baseband support as with 5.x.

Thanks to @iamgolfy for helping test the 2601 Windows fix!

You can download the latest version of RedSn0w from here.

Famous hacker has already jailbroken the iPhone 5! Chpwn posted several photos via twitter. The pictures shows an iPhone 5 running iOS 6 with Cydia installed and Cydia home page on iPhone 5. Take a look:

The iPhone Dev-Team released RedSn0w 0.9.14b2 with improved algorithm for baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b2 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04. With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before). This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

The revised steps are:

1. Connect your iPhone in normal mode, then click “Jailbreak” after redsn0w identifies its model and BB version (you needn’t pre-select the IPSW anymore).
2. Choose the “Downgrade from iPad baseband” option (you needn’t worry about de-selecting Cydia anymore).
3. Do a controlled “slide to power off” shutdown of your phone and proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step. THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running. Please just let it be for the next 3-8 minutes! When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners. The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

MuscleNerd has announced the successful jailbreak of his iPod touch 4G on iOS 6 Beta.

Here’s ioreg of my tethered-JB ipt4g 6.0: http://is.gd/1qOwvW ..MANY things including Cydia are broken, don’t expect beta JB for a while!

iH8Sn0w released Sn0wBreeze 2.9.6. What’s new:

• Added 5.0.2/9B830 Apple TV 2 untether payload. (Thanks @planetbeing & @nitoTV)
• Apple TV 2 users can now resize their root partition.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

Sn0wbreeze 2.9.6 supports iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G, iPod Touch 4G and Apple TV 2G. It does not work with A5 devices, like iPad 2, iPad 3 and iPhone 4S.

You can download Sn0wBreeze 2.9.6 from here.

Our step-by-step tutorials for Sn0wBreeze 2.9.6 are available here:

• iPhone 4
• iPhone 3GS

Tutorials for jailbreak using Absinthe 2.0 are here.

You can find step-by-step instructions on how to jailbreak Apple TV 2G with Seas0nPass here (Windows, Mac OS).

iH8Sn0w released Sn0wBreeze 2.9.5. What’s new:

• Added 5.1.1/9B208 untether payload for the iPhone 4 GSM.
• Added iPhone 3GS (iPad Baseband users) location services fix.

Just like version 2.9.4 the new 2.9.5 version supports untethered jailbreak of A4 devices on iOS 5.1.1. Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

Sn0wbreeze 2.9.5 supports iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G, iPod Touch 4G and Apple TV 2G. It does not work with A5 devices, like iPad 2, iPad 3 and iPhone 4S.

You can download Sn0wBreeze 2.9.5 from here.

Our step-by-step tutorials for Sn0wBreeze 2.9.5 are available here:

• iPhone 4
• iPhone 3GS

Don’t Forget to Save Your iOS 5.1.1 SHSH Blobs to preserve the ability to do iOS 5.1.1 untethered jailbreak in the future. Apple might release updated iOS firmware soon to fix and disable the jailbreak. After next firmware release you will not be able to restore to 5.1.1 any more.

You can find our instructions on how to save your SHSH Blobs using TinyUmbrella here: Windows, Mac.

If you have Cydia installed already, you can check if Cydia have saved your iOS 5.1.1 SHSH keys. Just run Cydia and look at the top of the page:

If you see 5.1.1 – everything is fine, you don’t have to run TinyUmbrella.