Hacktivate | Jailbreak iPhone, iPod Touch, iPad Skip to content

Jailbreak iPhone, iPod Touch, iPad

новости про джейлбрейк iPhone, iPod Touch и iPad

Archive

Tag: hacktivate

sn0wbreeze 297 500x396 Sn0wBreeze 2.9.7 released: iOS 6.0.1 support added

iH8Sn0w released Sn0wBreeze 2.9.7 that brings support for tethered jailbreak of iOS 6.0.1. New version supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

What is New?
● Added 6.0 (10A403)/6.0.1 (10A523) support. (Only includes iPhone 3GS & A4 devices).
● The 6.0/6.0.1 is currently a tethered based jailbreak via iBooty (except for iPhone 3GS old bootrom users).
● SAM is built-in for iOS 6 hacktivations. (Hacktivated phones can reboot to a semi-tethered state after being activated [rather than just hang at the Apple Logo]). Kudos @sbingner!

Downgrading:
● Use iFaith mode after selecting/downloading the appropriate IPSW for your device. You will then be prompted to browse for SHSH blobs for the IPSW you have selected.
● Remember to enter a PWNED DFU state with sn0wbreeze’s iREB button in the top bar of sn0wbreeze prior to (SHIFT + Restoring) the custom signed IPSW!

iREB & iOS 6:
Due to some changes in iOS 6, the current public standalone version of iREB will NOT enter a proper PWNED DFU state for restoring to custom iOS 6 IPSWs. An update for the standalone version should come sometime this week. In the meantime, use the iREB tab located in sn0wbreeze’s top status bar to enter a proper PWNED DFU state.

A5(X)/A6(X) Support?:
As stated many times in the past, sn0wbreeze cannot be updated to work on A5(X)/A6(X) devices until a low level exploit in DFU or iBoot is found and made public.

A5(X)/A6(X) Baseband Preservation/Hacktivation?
For those running A5(X)/A6(X) devices and need to preserve your baseband, there is nothing you can do at the moment. For those wanting to hacktivate, the only advice I can give is to buy the carrier’s SIM (the one its locked to obviously) on ebay. The SIM does not have to be active with the carrier to activate the phone.

Known Bugs/Issues:
● Windows 8 users currently need to use this workaround to run sn0wbreeze.
● iPad baseband will fail to flash on iOS 4.0 –> iOS 4.2.1 restores.
● iPod Touch 2G 4.x.x restores fail.

sn0wbreeze28b7 500x392 iH8Sn0w released Sn0wBreeze 2.8b7 to jailbreak, hactivate and bypass UDID check for iOS 5 Beta 7

iH8Sn0w released Sn0wBreeze 2.8b7, which adds jailbreak support for the latest iOS 5 beta 7 firmware.

Sn0wBreeze creates custom firmware and allows users to preserve baseband for unlock (ultrasn0w doesn’t work with iOS 5 yet). This new version also adds hacktivation and removes UDID developer check. This means that you can try iOS 5 without developer account from Apple.

You can download Sn0wBreeze 2.8b7 for Windows here.

sn0wbreeze v2.8b7 – Release Notes
———————————
* Now jailbreaks iOS 5 beta 7.
* Still removes UDID Developer check + Beta timer.
* Still has the ability to hacktivate.
* Still preserves the baseband (as always!).
———————————
Tethered?
———————————
* iPhone 3GS (old bootrom)…..NO
* iPhone 3GS (new bootrom)….YES
* iPhone 4 (GSM)…………..YES
* iPhone 4 (CDMA)………….YES
* iPod Touch 3G……………YES
* iPod Touch 4…………….YES
* iPad 1G…………………YES
———————————
** REMEMBER TO BOOT WITH “iBooty” **
———————————

sn0wbreeze 28b6 500x393 iH8Sn0w released Sn0wBreeze 2.8b6 to jailbreak and hactivate iOS 5 Beta 6

iH8Sn0w released Sn0wBreeze 2.8b6, which adds support for the latest iOS 5 beta 6 firmware.

Sn0wBreeze is a quite useful jailbreak utility. It creates custom firmware and allows users to preserve baseband for unlock. This new version also adds hacktivation and removes UDID developer check. This means that you can try iOS 5 without developer account from Apple.

You can download Sn0wBreeze 2.8b6 for Windows here.

sn0wbreeze v2.8b6 – Release Notes
———————————
* Now jailbreaks iOS 5 beta 6.
* Still removes UDID Developer check + Beta timer.
* Still has the ability to hacktivate.
* Still preserves the baseband (as always!).
———————————
Supported Devices and Tethered?
———————————
* iPhone 3GS (old bootrom)…..NO
* iPhone 3GS (new bootrom)….YES
* iPhone 4 (GSM)…………..YES
* iPhone 4 (CDMA)………….YES
* iPod Touch 3G……………YES
* iPod Touch 4…………….YES
* iPad 1G…………………YES
———————————

sn0wbreeze 2511 Sn0wBreeze 2.5.1 released: supports Apple TV 2G and 06.15 baseband

iH8sn0w updated their iOS 4.3.1 untethered jailbreak utility – released Sn0wBreeze 2.5.1.

They have added

Sn0wBreeze is used to create custom firmwares with jailbreak and preserve iPhone baseband. It is available for Windows only.

You can download Sn0wBreeze 2.5.1 here.

Here’ official changelog.

————————————————————————-
sn0wbreeze 2.5.1 Change-log:
————————————————————————-
* Cydia 1.1.1 is now pre-installed.
* iPhone 3GS users can now flash the iPad 06.15.00 baseband.
* Animate (Animated Boot Logos) by the Chronic Dev-Team is now supported.
* Added afc2
* Apple TV 2 is now fully supported.
* Added Apple TV 2 DFU Instructions.
* YouTube issues resolved on hacktivated devices.
* iPhone 3GS old-bootrom issues fixed (Error 37).
————————————————————————-
ULTRASN0W USERS:
————————————————————————-
There is a temp. fix available on Pushfix’s Cydia repo (http://cydia.pushfix.info)
for getting ultrasn0w to work on preserved basebands on 4.3.1.
[It does not fix the iPhone 4 single bar issue though!]
————————————————————————-

ra1ndrop iPhone iOS 4.1 Jailbreak Released from GeoHot, called LimeRa1n

Famous hacker Geohot is back and today he released the latest iOS 4.1 jailbreak. It is called LimeRa1n and supports iPhone 3GS, iPod Touch 3G, iPad, iPhone 4, iPod Touch 4G with iOS firmwares 4.0-4.1 and beyond. It can also hacktivate your device, so there is no need in phone SIM-cards and other tricks.

This software is still in beta and was updated 3 times in last several hours. So use with caution.

There is Windows version only for now. Geohot plans to release LimeRa1n for Mac and Linux soon. You can Download it here.

Some users report that they have jailbroken their iOS 3.2.2 iPads successfully with limera1n, while others report that they tried, but failed.

Do not forget to backup.

For many users of iPhone 3GS and iPhone 4 with iOS 4.0.2 now there is a hope to perform jailbreak using LimeRa1n and unlock using ultrasn0w. We recommend NOT to do it if you have not saved your SHSH keys. You can try, but if something goes wrong without SHSH keys you’ll have to restore to iOS 4.1, and there is no unlock for iOS 4.1 (possibly forever). Just wait for PwnageTool utility.

DevTeam reported that Limera1n uses a different exploit than SHAtter, so they will not release SHAtter utility, they don’t want let Apple fix both security holes. However they plan to release PwnageTool using the same exploit.

limetime 400x245 iPhone iOS 4.1 Jailbreak Released from GeoHot, called LimeRa1n

Known bugs:

  • some people must reboot to see Cydia
  • beta iOS versions aren’t supported
  • iPod Touch 2G support coming soon
  • for iPhone 3G use redsn0w 0.9.6 b1

Here’s a quick changelog of recent beta releases:

  • BETA1 – first release
  • BETA2 – fixed kernel patching magic, rerun BETA2+ over BETA1
  • BETA3 – fixed new bootrom 3GS
  • BETA4 – uninstall fixed, respring fixedish

redsn0w 095b5 5 374x400 How to jailbreak iOS 4.0.2 iPhone 3G

You cannot use JailBreakMe method to jailbreak and unlock iOS 4.0.2 on iPhone 3G. However you can still jailbreak and unlock iPhone 3G using redsn0w. Here are the instructions:

  • Download the latest RedSn0w 0.9.5-b5 in our utilities page here.
  • Download firmware images for iOS 4.0 here.
  • Run RedSn0w and point it at the 4.0 IPSW. (Yes – point it at the 4.0 IPSW even though you’re at 4.0.2). This will also hacktivate your iPhone3G at 4.0.1 if you haven’t already been activated by iTunes.
  • If you need a carrier unlock – install ultrasn0w in Cydia (add repository http://repo666.ultrasn0w.com). For T-Mobile in the USA remember to turn off 3G mode in Settings→General→Network.

pwned RedSn0w is able to jailbreak iOS 4.1 beta 2

MuscleNerd tweeted today that the recent redsn0w utility is able to jailbreak the iOS 4.1 beta2 on iPhone 3G and iPod Touch 2G. This is useful for developers only, however good news for everyone.

Here’s some info from the DevTeam wiki page:

If you’ve updated to 4.1beta2 on iPhone3G or iPod2G(non-MC), you can use this redsn0w from June to jailbreak. Just point it at the 4.0 IPSW (the public one, not the developer GM one).

(Yes – point it at the 4.0 IPSW even though you’re at 4.1beta2).

Don’t do this if you need the ultrasn0w carrier unlock!!

Note 1: This won’t hacktivate your iPhone3G – but for those with legit access to the 4.1beta2 this shouldn’t matter. Please don’t pirate Apple software

Note 2: If you’re at 4.1beta2 you’ll probably experience network problems after jailbreaking. Until a new version of redsn0w is released, you may need to rely on afc2 access (such as FunBox-like file browser programs) to manipulate your filesystem.

Note 3: This is recommended only for power users who can deal with the problems that will pop up as the JB apps fall further behind the beta firmwares.

redsn0w 095b5 5 374x400 How to jailbreak and unlock iPhone 3G with firmware iOS 4.0.1

There is no official jailbreak utility for iOS 4.0.1. However you can still jailbreak and unlock iPhone 3G. Just do the following:

  • Download the latest RedSn0w 0.9.5-b5 in our utilities page here.
  • Download firmware images for iOS 4.0 here.
  • Run RedSn0w and point it at the 4.0 IPSW. (Yes – point it at the 4.0 IPSW even though you’re at 4.0.1). This will also hacktivate your iPhone3G at 4.0.1 if you haven’t already been activated by iTunes.
  • Install ultrasn0w in Cydia (add repository http://repo666.ultrasn0w.com) if you need a carrier unlock (and in the USA, remember to turn off 3G mode in Settings→General→Network).

redsn0w ios4 RedSn0w 0.9.5b5 3: iOS 4 jailbreak for iPhone 3G and iPod Touch 2G

DevTeam successfully jailbreaked new iOS 4. They updated jailbreak utility redsn0w to version 0.9.5b5-3. Supported devices are iPhone3G and iPod Touch 2G (not MC). New redsn0w is also able to hacktivate iOS 4.0 for iPhone3G.

You can download redsn0w 0.9.5b5-3 here:

For latest version we recommend to use our utilities page.

redsn0w 095b5 3 RedSn0w 0.9.5b5 3: iOS 4 jailbreak for iPhone 3G and iPod Touch 2G

blackra1n win Jailbreak utility blackra1n released

GeoHot released blackra1n. blackra1n is a 30 second ALL device firmware 3.1.2 jailbreak. There is even supports for iPod Touch 3G jailbreak. For now there is only a version for Windows, but the Mac version should be released soon (UPDATE: Mac version is ready)

Download blackra1n utility here.

Warning iPhone 3G and iPhone 3GS unlockers, do not upgrade to firmware 3.1.2 using iTunes, if you want to keep your unlock. Baseband cannot be downgraded.

PS: Blackra1n doesn’t hacktivate the device.