IOS 4.2 | Jailbreak iPhone, iPod Touch, iPad Skip to content

Jailbreak iPhone, iPod Touch, iPad

новости про джейлбрейк iPhone, iPod Touch и iPad


Tag: iOS 4.2

sn0wbreeze 297 500x396 Sn0wBreeze 2.9.7 released: iOS 6.0.1 support added

iH8Sn0w released Sn0wBreeze 2.9.7 that brings support for tethered jailbreak of iOS 6.0.1. New version supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

What is New?
● Added 6.0 (10A403)/6.0.1 (10A523) support. (Only includes iPhone 3GS & A4 devices).
● The 6.0/6.0.1 is currently a tethered based jailbreak via iBooty (except for iPhone 3GS old bootrom users).
● SAM is built-in for iOS 6 hacktivations. (Hacktivated phones can reboot to a semi-tethered state after being activated [rather than just hang at the Apple Logo]). Kudos @sbingner!

● Use iFaith mode after selecting/downloading the appropriate IPSW for your device. You will then be prompted to browse for SHSH blobs for the IPSW you have selected.
● Remember to enter a PWNED DFU state with sn0wbreeze’s iREB button in the top bar of sn0wbreeze prior to (SHIFT + Restoring) the custom signed IPSW!

iREB & iOS 6:
Due to some changes in iOS 6, the current public standalone version of iREB will NOT enter a proper PWNED DFU state for restoring to custom iOS 6 IPSWs. An update for the standalone version should come sometime this week. In the meantime, use the iREB tab located in sn0wbreeze’s top status bar to enter a proper PWNED DFU state.

A5(X)/A6(X) Support?:
As stated many times in the past, sn0wbreeze cannot be updated to work on A5(X)/A6(X) devices until a low level exploit in DFU or iBoot is found and made public.

A5(X)/A6(X) Baseband Preservation/Hacktivation?
For those running A5(X)/A6(X) devices and need to preserve your baseband, there is nothing you can do at the moment. For those wanting to hacktivate, the only advice I can give is to buy the carrier’s SIM (the one its locked to obviously) on ebay. The SIM does not have to be active with the carrier to activate the phone.

Known Bugs/Issues:
● Windows 8 users currently need to use this workaround to run sn0wbreeze.
● iPad baseband will fail to flash on iOS 4.0 –> iOS 4.2.1 restores.
● iPod Touch 2G 4.x.x restores fail.

sn0wbreeze 29 500x399 Sn0wBreeze 2.9 released: brings iOS 5.0.1 untether

iH8sn0w has released new version of popular jailbreak utility Sn0wBreeze 2.9. Sn0wbreeze is used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock. New version 2.9 adds support for untethered iOS 5.0.1 jailbreak as well as support for all firmwares supported by previous versions of sn0wbreeze.

For now Sn0wBreeze 2.9 supports untethered jailbreak for iOS 3.1.3, 3.2.x, 4.0.x, 4.1, 4.2.1 – 4.2.8, 4.3 – 4.3.3 and 5.0.1. Supported devices are: iPhone 2G, iPhone 3G, iPhone 3GS, iPhone 4, iPad 1, iPod Touch 2G, iPod Touch 3G, iPod Touch 4G.

UPDATE: sn0wbreeze updated to 2.9.1

You can download Sn0wBreeze 2.9.1 here.

Here is official changelog:

sn0wbreeze v2.9 [Two year anniversary]

  • Happy birthday sn0wbreeze!
  • Brought back old firmware support in one release!
  • GUI Improvements
  • You can now build IPSWs with TinyUmbrella/iFaith blobs!
  • Removes OTA Updates/badge on iOS 5.x.x+ devices.
  • Added an IPSW Downloader
  • Built-in iREB functionality updated from newest iREB r5 module.
  • Custom Packages in Expert actually works now. :P
  • All supported firmwares in this release are untethered.
  • A5 devices are NOT supported at this time due to no public DFU/iBoot exploit.

Supported iOS Revisions:

  • iOS 3.1.3
  • iOS 3.2.x
  • iOS 4.0.x
  • iOS 4.1
  • iOS 4.2.1 – 4.2.8
  • iOS 4.3 – 4.3.3
  • iOS 5.0.1
  • iOS 4.3.4/4.3.5/4.4.x/5.0 support coming soon

jailbreak Jailbreak & Unlock tutorials and FAQ

UPDATE: Apple latest firmware is iOS 5.1.1. Apple has stopped signing all other firmwares, including iOS 5.0.1, iOS 4.3.3 and iOS 4.3.5. This means you can NOT restore to 5.0.1/4.3.3/4.3.5 any more (both original and custom), unless you have saved your SHSH keys for it.

If you have decided to perform an untethered jailbreak and unlock, you need to get the following information:

  1. What type of device do you have (iPhone 3G/3GS/4, iPod Touch 3G/4G, iPad 1/2, Apple TV)?
  2. Do you need unlock (if your iPhone locked to one carrier and you want to use it with another)?
    The answer is NO, if the device is not iPhone, if it was purchased as factory unlocked and can be used with any cellular carrier (f.e. in Canada, France, etc).
    If the answer is YES, you need to find out your modem version (Setting-General-About-Modem).
  3. What firmware version do you have? Take a look at Setting-General-About-Version. For example it could be iOS 4.3.3.
  4. What operating system do you use on your desktop (Windows, Mac OS)?

How to perform jailbreak, when you do NOT need an unlock

For iPhone 3G the latest is iOS 4.2.1. You can perform jailbreak with any utility. For iOS 4.2.1 you can also use them or GreenPois0n (Windows, Mac OS).

iPad 2 jailbreak is available only for iOS 4.3.3 via JailbreakMe and and iOS 5.0.1 via Absenthe.

iPhone 4S jailbreak is available for iOS 5.0 / iOS 5.0.1 via Absenthe.

iOS 4.3.3

Apple stopped signing iOS 4.3.3, so you cannot update to iOS 4.3.3 without SHSH keys saved (in advance some time ago). If you have iPhone 4, iPhone 3GS, iPad 1, iPod Touch 3G or iPod Touch 4G that run iOS 4.3.3 – use JailbreakMe or RedSn0w to untether jailbreak your device.

If you have saved SHSH keys for iOS 4.3.3 you can use PwnageTool (Mac OS) or Sn0wBreeze (Windows).

iOS 4.3.4/4.3.5

For iOS 4.3.4/4.3.5 only tethered jailbreak is possible with redsn0w. Tethered means that each time you restart your device you will have to connect it to a computer and run redsn0w. The untethered iOS 4.3.5 jailbreak is possible only for iPhone 3GS with old bootrom. You can detect your bootrom version using this tutorial.

iOS 5

To jailbreak and unlock iOS 5 use latest version of redsn0w 0.9.9 or sn0wbreeze 2.8. You can jailbreak tethered or semi-tethered.

The untethered iOS 5 jailbreak is possible only for iPhone 3GS with old bootrom. You can detect your bootrom version using this tutorial.

iOS 5.0.1

For iPhone 4/3GS, iPad 1, iPod Touch 3G/4G an untethered jailbreak is available for iOS 5.0.1. For untethered jailbreak use the latest redsn0w 0.9.10 or Corona – package from Cydia to untether currently installed tethered jailbreak.

Tutorial how to untether installed tethered jailbreak is available here.

For iPhone 4S and iPad 2 use Absenthe.

For tethered iOS 5.0.1 jailbreak you an use redsn0w 0.9.9 and sn0wbreeze 2.8.

iOS 5.1 / iOS 5.1.1

For now only tethered jailbreak is available for iPhone 4/3GS, iPad 1 and iPod Touch 3G/4G for iOS 5.1 and iOS 5.1.1.

You can download all firmwares here.


Here are our step-by-step tutorials that will guide you through the jailbreak process:

iphone4s Jailbreak & Unlock tutorials and FAQ iPhone 4S

UnTethered jailbreak iOS 5.0 / iOS 5.0.1:

iphone 4 s Jailbreak & Unlock tutorials and FAQ iPhone 4

Tethered jailbreak iOS 5.1.1:

Tethered jailbreak iOS 5.1:

UnTethered jailbreak iOS 5.0.1:

Semi-Tethered jailbreak iOS 5:

Tethered jailbreak iOS 4.3.5:

UnTethered jailbreak iOS 4.3.3:

Read the rest of this entry »

ios 4 3 4 Apple released iOS 4.3.4 that blocks JailbreakMe exploit

Apple has released iOS 4.3.4 to block the PDF exploit used by comex in JailbreakMe utility. JailbreakMe can wireless jailbreak all devices on iOS 4.3.3.

iOS 4.3.4 Software Update
Fixes security vulnerability associated with viewing malicious PDF files.

Products compatible with this software update:
iPhone 4 (GSM model)
• iPhone 3GS
• iPad 2
• iPad
iPod touch (4th generation)
• iPod touch (3rd generation)

For iPhone 4 Verizon Apple released iOS 4.2.9.

The official information is available here:

JailbreakMe2 500x280 The new JailbreakMe for iOS 4.3.3 has officially been released

Today Comex has officially released the new web-based jailbreak for iOS 4.3.3. It supports all devices including iPad 2.

The jailbreak uses a PDF exploit similar to old JailbreakMe and does not require your device to be connected to the computer.

To jailbreak, navigate to on your iOS device after updating to iOS 4.3.3 (if you do not need unlock). We will be posting detailed instructions shortly.

Here is the list of devices and iOS versions that are supported:

  • iPad 1: iOS 4.3 – 4.3.3
  • iPad 2: iOS 4.3.3
  • iPhone 3GS: iOS 4.3 – 4.3.3
  • iPhone 4 GSM: iOS 4.3 – 4.3.3
  • iPhone 4 CDMA: iOS 4.2.6 – 4.2.8
  • iPod Touch 3G: iOS 4.3, 4.3.2, 4.3.3
  • iPod Touch 4G: iOS 4.3 – 4.3.3

Step by step JailbreakMe tutorials:

ios432 Apple released new firmware iOS 4.3.2

Apple has released iOS 4.3.2 for the iPhone, iPad, and iPod touch.

This update contains improvements and other bug fixes including:

  • Fixes an issue that occasionally caused blank or frozen video during a FaceTime call
  • Fixes an issue that prvented some international users from connecting to 3G networks on iPad W-Fi + 3G
  • Contains the latest security updates

Products compatible with this software update:

  • iPhone 4 (GSM model)
  • iPhone 3GS
  • iPad 2
  • iPad
  • iPod touch (4th generation)
  • iPod touch (3rd generation)

For information on the security content of this update, please visit

Apple has also updated the firmware for the Verizon iPhone to 4.2.7 although this wasn’t listed in the release notes.

Current jailbreak tools work with iOS 4.3.2 in tethered mode only. Please save your SHSH keys for iOS 4.3.1 asap.

Here are direct download links for the latest firmwares:

device current version date found
AppleTV(2G) (AppleTV2,1) 4.2.1 (8F202) 03/22/2011 16:12:01
iPad (iPad1,1) 4.3.2 (8H7) 04/14/2011 13:06:02
iPad2,1 (iPad2,1) 4.3.2 (8H7) 04/14/2011 13:06:02
iPad2,2 (iPad2,2) 4.3.2 (8H7) 04/14/2011 13:06:02
iPad2,3 (iPad2,3) 4.3.2 (8H8) 04/14/2011 13:06:02
iPhone (iPhone1,1) 3.1.3 (7E18) 04/08/2010 21:05:48
iPhone3G (iPhone1,2) 4.2 (8C148) 11/22/2010 13:08:57
iPhone3GS (iPhone2,1) 4.3.2 (8H7) 04/14/2011 13:06:02
iPhone4 (iPhone3,1) 4.3.2 (8H7) 04/14/2011 13:06:02
iPhone4(vz) (iPhone3,3) 4.2.7 (8E303) 04/14/2011 13:06:02
iPodTouch(2G) (iPod2,1) 4.2 (8C148) 11/22/2010 13:08:57
iPodTouch(3G) (iPod3,1) 4.3.2 (8H7) 04/14/2011 13:06:02
iPodTouch(4G) (iPod4,1) 4.3.2 (8H7) 04/14/2011 13:06:02
last updated: 04/14/2011 13:14:02 EDT

TinyUmbrella Jailbreakers and Unlockers   save your iOS 4.2.1 SHSH blobs now!

Apple will soon disable restoring to iOS 4.2.1 for iPad and iPhone. In order to preserve jailbreak and unlock save your SHSH keys now! 4.3b keys might also help you in future untethered jailbreak.

You can do that using TinyUmbrella utility. Download it for Mac or Windows here. Just run it and push “Save ALL SHSHs” button.

The other way is to save SHSHs via Cydia. Run Cydia and make sure the keys are saved (green line on the top).

pwnagetool413 3gs 3 300x267 Step by step Tutorial: jailbreak iOS 4.2.1 on iPhone/iPod/iPad using PwnageTool 4.2 (Mac OS)

UPDate: save your iOS 4.2.1 SHSH blobs now!

UPDate 2: Attention! We’ve received info, that Apple stopped signing iOS 4.2 for devices for which iOS 4.3 is available. This means you will not be able to restore to 4.2.1 without saved SHSH keys.

Using this tutorial you will be able to jailbreak iOS 4.2.1 running on iPhone 3G, iPhone 3GS, iPhone 4, iPod Touch 3G, iPod Touch 4G and iPad. Pwnagetool will also preserve baseband version if you need carrier unlock. If you have updated the baseband to version 06.15, you can use this tutorial. This tutorial uses PwnageTool 4.2 for Mac OS X.

We are not developers of jailbreak utilities, so we cannot assure that everything will work just fine. However we tried this tutorial on several devices and succeeded.

We will use iPhone 4 in our jailbreak tutorial. The process is the same for all devices.

Step One
Make a folder called “Pwnage” on the desktop. Download a couple of things:

Read the rest >>>

WhiteD00r WhiteD00r custom iOS 4.2.1 firmware for iPhone 2G and iPod touch 1G released

Apple stopped to support original iPhone 2G and iPod touch 1G starting from iOS 4.0. Their decision was justified because of the low RAM and sow CPU in these first-gen devices released back in 2007.

iPhone jailbreak community has now come up with a mod, which brings the complete look and feel of iOS 4.2.1 for iPhone 2G, 3G and iPod touch 1G and 2G. The mod is basically based on the iPhone OS 3.1.3, to replicate the experience of iOS 4 on the first and second generation iPhone and iPod touch.

This custom firmware, named WhiteD00r, includes everything from iOS 4.x: wallpapers, new semi transparent dock (and UI), backgrounds, all new icons from iOS 4.x, Voice Control, multitasking, video recording, and more. Full list of features can be found here.

Moreover WhiteD00r was also relased for iPhone 3G and iPod touch 2G. Regular iOS 4.х works really slow, on these devices, while modified 3.1.3 has much more chances.

WhiteD00r custom 4.2.1 firmware for iPhone 2G, iPhone 3G, iPod touch 1G and iPod touch 2G can be downloaded from here.

Here is a video of it in action:

gplogo New Greenpois0n RC6.1 jailbreak released with iBooks DRM fix

The Chronic Dev Team has released Greenpois0n RC6.1, a new version of their ‘untethered’ iOS 4.2.1 jailbreak tool which now includes an update that disables Apple’s means of protecting the iBooks application from jailbreakers.

Recent Greenpois0n changelog:

  • RC6.1: comex ‘hunnypot’ iBooks fix, don’t overwrite animate if it already exist
  • RC6: Apple TV 2 support, fixed emulators compatibility issues with greenpois0n
  • RC5.4: Verizon iPhone 4 is now supported !

Greenpois0n RC6.1 supports iPod Touch 2G, iPod Touch 3G, iPod Touch 4G, iPad, iPhone 3GS, iPhone 4, Verizon iPhone 4 (iOS 4.2.6) and Apple TV 2G.

You can download the latest Greenpois0n RC6.1 here.