The Evad3rs have released Evasi0n 1.3, an update to the jailbreak utility that brings support for the new iOS 6.1.1 iPhone 4S firmware. Additionally, the team notes that OS X 10.5 should be fully supported now and the linux glibc requirement has been lowered to 2.3.
Version 1.3
● Support for 6.1.1 on the iPhone 4S.
You can download Evasi0n 1.3 .
If you haven’t jailbroken yet, you can find the our step-by-step tutorials here:
The iPhone Dev-Team has released UltraSn0w 1.2.8 to bring unlock support for some older basebands on iOS 6.1.
MuscleNerd commented in twitter:
Version 1.2.8 is compatible with 6.1 main firmware
Supported devices with iOS 6.1: и iPhone 3GS.
Supported modem versions: 01.59.00, 04.26.08, 05.11.07, 05.12.01, 05.13.04 и 06.15.00.
You can install UltraSn0w 1.2.8 from Cydia.
This step-by-step tutorial will guide you through the process of full restore, that is for iOS 6.1 jailbreak. You can use this tutorial for any iPhone, iPod Touch and iPad.
Important: do not update to iOS 6.1 if you need carrier unlock.
Step 1
Make a folder called “Firmware”. Download iOS 6.1 for your Apple device: .
We have downloaded iOS 6.1 for uour :
Step 2
Connect your device to the computer and launch iTunes. Make sure you have the latest iTunes installed.
Select your device from the list of devices on the left.In iTunes 11 to activate left panel press Ctrl+S.
Create a backup by right-clicking on the name in Devices (iTunes left pane) and choosing Back Up. In iTunes 11 you can click Back Up Now button.
Step 3
Now hold down Option (Mac) or Shift (Windows) key and click the Restore button.
Navigate to the Firmware folder and select the iOS 6.1 firmware ipsw. Click the Open button to continue.
After iOS update iTunes might ask if you want to setup your iPhone as a new device or restore from the backup.
Step 4
That’s it.
Pod2g confirmed that the Evad3rs Dev-Team is ready with a jailbreak for iOS 6.1 and credits Planetbeing and Pimskeks for the accomplishment in an interview with iDigitalTimes.
“For your information and this is important to me that everybody knows about it also, this jailbreak will be @planetbeing and @pimskeks. I arrived at the end, gave ideas that pushed them to their maximum, I kinda unblocked the situation, but it would certainly have happened without me helping.”
“Now I am helping as much as I can in terms of communication, websites, and also development, but I was not involved the same way as previous, focused on my work and all… Yes, in order @planetbeing, @pimskeks, then me.”
According to the hacker, iOS 6.0 is jailbroken as is iOS 6.1 Beta 4. The team is now waiting for iOS 6.1 GM to drop after which they can confirm there is no new security measures introduced. Once everything has been tested successfully the team will release the jailbreak. The public jailbreak will be free. It is rumored that all devices will are supported: iPhone 3GS, , iPhone 4S, iPhone 5, iPod Touch 4G, iPod Touch 5G, iPad Mini, iPad 2, iPad 3 and iPad 4.
“6.0 is jailbroken, 6.1 beta 4 also. Now we are waiting 6.1 to confirm and release.”
The new Evad3rs Dev-Team consists of Pod2g, MuscleNerd, Planetbeing, and Pimskeks.
Here are our step-by-step tutorials that will guide you through all the process of tether jailbreaking iOS 6.0.1 with redsn0w and sn0wbreeze:
Tethered jailbreak iOS 6.0.1
iH8Sn0w released Sn0wBreeze 2.9.7 that brings support for tethered jailbreak of iOS 6.0.1. New version supports iPhone 3GS, and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.
Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.
You can find the release notes below. You can download the latest version of Sn0wBreeze from .
What is New?
● Added 6.0 (10A403)/6.0.1 (10A523) support. (Only includes iPhone 3GS & A4 devices).
● The 6.0/6.0.1 is currently a tethered based jailbreak via iBooty (except for iPhone 3GS old bootrom users).
● SAM is built-in for iOS 6 hacktivations. (Hacktivated phones can reboot to a semi-tethered state after being activated [rather than just hang at the Apple Logo]). Kudos @sbingner!Downgrading:
● Use iFaith mode after selecting/downloading the appropriate IPSW for your device. You will then be prompted to browse for SHSH blobs for the IPSW you have selected.
● Remember to enter a PWNED DFU state with sn0wbreeze’s iREB button in the top bar of sn0wbreeze prior to (SHIFT + Restoring) the custom signed IPSW!iREB & iOS 6:
Due to some changes in iOS 6, the current public standalone version of iREB will NOT enter a proper PWNED DFU state for restoring to custom iOS 6 IPSWs. An update for the standalone version should come sometime this week. In the meantime, use the iREB tab located in sn0wbreeze’s top status bar to enter a proper PWNED DFU state.A5(X)/A6(X) Support?:
As stated many times in the past, sn0wbreeze cannot be updated to work on A5(X)/A6(X) devices until a low level exploit in DFU or iBoot is found and made public.A5(X)/A6(X) Baseband Preservation/Hacktivation?
For those running A5(X)/A6(X) devices and need to preserve your baseband, there is nothing you can do at the moment. For those wanting to hacktivate, the only advice I can give is to buy the carrier’s SIM (the one its locked to obviously) on ebay. The SIM does not have to be active with the carrier to activate the phone.Known Bugs/Issues:
● Windows 8 users currently need to use workaround to run sn0wbreeze.
● iPad baseband will fail to flash on iOS 4.0 –> iOS 4.2.1 restores.
● iPod Touch 2G 4.x.x restores fail.
UPDATE: tutorials for iOS 6.0.1 jailbreak are available
Here are our step-by-step tutorials that will guide you through all the process of tether jailbreaking iOS 6 with redsn0w:
Tethered jailbreak iOS 6
(Un)Tethered jailbreak iOS 6
Tethered jailbreak iOS 6
Tutorials for iOS 5.1.1 can be found .
Tutorials for iOS 5.0.1 can be found .
Tutorials for iOS 5.1 can be found .
Other tutorials are available .
The iPhone Dev-Team has updated RedSn0w 0.9.15 with some bug fixes for iPhone 3GS and iPad owners.
Version 0.9.15b2 fixes a few issues for 3GS owners: old-bootrom awesomeness is no longer forgotten directly after a restore, and iPad baseband upgrade/downgrade support is fixed (same production date cutoffs apply!). If your 3GS is currently tethered at 6.0 even though you have an old bootrom, just re-run redsn0w’s Jailbreak step (no need to restore). Don’t forget you can add some pizzaz with your own boot logo or a nerdy verbose boot.
Redsn0w 0.9.15 gives us possibility to do iOS 6 jailbreak and different downgrade options.
You can download RedSn0w 0.9.15b2 .
The iPhone Dev-Team has announced RedSn0w 0.9.15b1 which brings numerous new features including iOS 6 jailbreak for old devices, ability to restore to older firmware, manipulating SHSH blobs and etc.
iOS 6 jailbrak is tethered for , iPhone 3GS and iPod Touch 4G, untethered only for old iPhone 3GS with old bootrom. Tethered jailbreak means that each time you restart your device you will need to connect it to a computer and run redsn0w.
iPhone 4S, iPhone 5, iPad 2 and iPad 3 are not supported.
We will create our step-by-step tutorials soon.
You can download RedSn0w 0.9.15b1 .
