IPod Touch 4 | Jailbreak iPhone, iPod Touch, iPad - Part 2 Skip to content

Jailbreak iPhone, iPod Touch, iPad

новости про джейлбрейк iPhone, iPod Touch и iPad

Archive

Tag: iPod Touch 4

sn0wbreeze 297 500x396 Sn0wBreeze 2.9.7 released: iOS 6.0.1 support added

iH8Sn0w released Sn0wBreeze 2.9.7 that brings support for tethered jailbreak of iOS 6.0.1. New version supports iPhone 3GS, iPhone 4 and iPod Touch 4G. It does not work with A5/A6 devices, like iPad 2, iPad 3, iPhone 4S, iPhone 5, etc.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

You can find the release notes below. You can download the latest version of Sn0wBreeze from here.

What is New?
● Added 6.0 (10A403)/6.0.1 (10A523) support. (Only includes iPhone 3GS & A4 devices).
● The 6.0/6.0.1 is currently a tethered based jailbreak via iBooty (except for iPhone 3GS old bootrom users).
● SAM is built-in for iOS 6 hacktivations. (Hacktivated phones can reboot to a semi-tethered state after being activated [rather than just hang at the Apple Logo]). Kudos @sbingner!

Downgrading:
● Use iFaith mode after selecting/downloading the appropriate IPSW for your device. You will then be prompted to browse for SHSH blobs for the IPSW you have selected.
● Remember to enter a PWNED DFU state with sn0wbreeze’s iREB button in the top bar of sn0wbreeze prior to (SHIFT + Restoring) the custom signed IPSW!

iREB & iOS 6:
Due to some changes in iOS 6, the current public standalone version of iREB will NOT enter a proper PWNED DFU state for restoring to custom iOS 6 IPSWs. An update for the standalone version should come sometime this week. In the meantime, use the iREB tab located in sn0wbreeze’s top status bar to enter a proper PWNED DFU state.

A5(X)/A6(X) Support?:
As stated many times in the past, sn0wbreeze cannot be updated to work on A5(X)/A6(X) devices until a low level exploit in DFU or iBoot is found and made public.

A5(X)/A6(X) Baseband Preservation/Hacktivation?
For those running A5(X)/A6(X) devices and need to preserve your baseband, there is nothing you can do at the moment. For those wanting to hacktivate, the only advice I can give is to buy the carrier’s SIM (the one its locked to obviously) on ebay. The SIM does not have to be active with the carrier to activate the phone.

Known Bugs/Issues:
● Windows 8 users currently need to use this workaround to run sn0wbreeze.
● iPad baseband will fail to flash on iOS 4.0 –> iOS 4.2.1 restores.
● iPod Touch 2G 4.x.x restores fail.

ios 6 jailbreak Tutorials for iOS 6 jailbreak

UPDATE: tutorials for iOS 6.0.1 jailbreak are available here.

Here are our step-by-step tutorials that will guide you through all the process of tether jailbreaking iOS 6 with redsn0w:

iphone 4 s Tutorials for iOS 6 jailbreak iPhone 4

Tethered jailbreak iOS 6

trans Tutorials for iOS 6 jailbreak

iphone3gs s Tutorials for iOS 6 jailbreak iPhone 3GS

(Un)Tethered jailbreak iOS 6

ipod touch 4g s1 Tutorials for iOS 6 jailbreak iPod Touch 4G

Tethered jailbreak iOS 6

Tutorials for iOS 5.1.1 can be found here.

Tutorials for iOS 5.0.1 can be found here.

Tutorials for iOS 5.1 can be found here.

Other tutorials are available here.

redsn0w 0915b2 313x400 DevTeam released RedSn0w 0.9.15b2

The iPhone Dev-Team has updated RedSn0w 0.9.15 with some bug fixes for iPhone 3GS and iPad owners.

Version 0.9.15b2 fixes a few issues for 3GS owners: old-bootrom awesomeness is no longer forgotten directly after a restore, and iPad baseband upgrade/downgrade support is fixed (same production date cutoffs apply!). If your 3GS is currently tethered at 6.0 even though you have an old bootrom, just re-run redsn0w’s Jailbreak step (no need to restore). Don’t forget you can add some pizzaz with your own boot logo or a nerdy verbose boot.

Redsn0w 0.9.15 brought gives us possibility to do iOS 6 jailbreak and different downgrade options.

You can download RedSn0w 0.9.15b2 here.

redsn0w ios6 313x400 Tethered iOS 6 jailbreak released

The iPhone Dev-Team has announced RedSn0w 0.9.15b1 which brings numerous new features including iOS 6 jailbreak for old devices, ability to restore to older firmware, manipulating SHSH blobs and etc.

iOS 6 jailbrak is tethered for iPhone 4, iPhone 3GS and iPod Touch 4G, untethered only for old iPhone 3GS with old bootrom. Tethered jailbreak means that each time you restart your device you will need to connect it to a computer and run redsn0w.

iPhone 4S, iPhone 5, iPad 2 and iPad 3 are not supported.

We will create our step-by-step tutorials soon.

You can download RedSn0w 0.9.15b1 here.

ios6 jailbreak1 313x400 iOS 6 jailbreak released for iPhone 3GS, iPhone 4, iPod 4G

The iPhone Dev-Team has released a tethered jailbreak of iOS 6 for the iPhone 3GS, iPhone 4, and iPod touch 4G.

Just like at the at the wind-down of last year’s WWDC, we’re releasing a developer-only version of a redsn0w tethered jailbreak for app developers.

Supported Devices:

  • iPod touch 4G
  • iPhone3GS
  • iPhone4 (GSM)
  • iPhone4 (CDMA)

You can download the latest version of RedSn0w from here:

DevTeam comments are available here.

jailbreak ios6 The iOS 6 Beta Has Already Been Jailbroken

MuscleNerd has announced the successful jailbreak of his iPod touch 4G on iOS 6 Beta.

Here’s ioreg of my tethered-JB ipt4g 6.0: http://is.gd/1qOwvW ..MANY things including Cydia are broken, don’t expect beta JB for a while!

ios6 jailbreak 500x256 The iOS 6 Beta Has Already Been Jailbroken

jailbreak iOS 5.1.1 500x263 Tutorials for iOS 5.1.1 untethered jailbreak

Here are our step-by-step tutorials that will guide you through all the process of untether jailbreaking iOS 5.1.1 with absinthe, redsn0w and sn0wbreeze:

iphone4s Tutorials for iOS 5.1.1 untethered jailbreak iPhone 4S

UnTethered jailbreak iOS 5.1.1

iphone 4 s Tutorials for iOS 5.1.1 untethered jailbreak iPhone 4

UnTethered jailbreak iOS 5.1.1


Read the rest of this entry »

redsn0w 0912b2 main 325x400 RedSn0w 0.9.12b2: minor update and bugfixes

The iPhone Dev-Team has released RedSn0w 0.9.12b2. New version has some bugfixes and additional question about jailbreak mode for A4 devices.

Redsn0w allows owners of A4+earlier devices to install rocky-racoon two different ways:

  • Backup/restore method similar to Absinthe and cinject.
  • Traditional limera1n-based ramdisk install. It is much faster, especially for users with lot’s music, movies, apps on the device.

Redsn0w 0.9.12b2 will ask owners of iPhone 3GS, iPhone 4, iPod Touch 3G, iPod Touch 4G and iPad 1 what jailbreak mode they would like to use.

redsn0w0912b2 499x318 RedSn0w 0.9.12b2: minor update and bugfixes

Starting with version 0.9.12b2, redsn0w will now explicitly ask users with limera1n-able devices whether they want to inject rocky-racoon using the DFU ramdisk method or the backup/restore method (the ramdisk method is better for those with lots of media on their device that would create very large backups, and it’s required for those with unactivated iPhones). If you’ll always want to use limera1n, you can select that in the Preferences pane. It also fixes an iBooks issue on old-bootrom 3GS iPhones, and provides more useful error messages when things go wrong.

RedSn0w 0.9.12b2 supports untethered iOS 5.1.1 jailbreak for all devices:

  • iPhone 3GS
  • iPhone 4
  • iPhone 4S
  • iPad 1
  • iPad 2
  • new iPad 3
  • iPod Touch 3G
  • iPod Touch 4G

You can download RedSn0w 0.9.12b2 here.

iOS 5.1.1 untethered jailbreak tutorial using Redsn0w is available here.

sn0wbreeze 296 500x397 Sn0wBreeze 2.9.6 released: added Apple TV 2G iOS 5.0.2 9B830 support

iH8Sn0w released Sn0wBreeze 2.9.6. What’s new:

  • Added 5.0.2/9B830 Apple TV 2 untether payload. (Thanks @planetbeing & @nitoTV)
  • Apple TV 2 users can now resize their root partition.

Sn0wbreeze can be used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock.

Sn0wbreeze 2.9.6 supports iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G, iPod Touch 4G and Apple TV 2G. It does not work with A5 devices, like iPad 2, iPad 3 and iPhone 4S.

You can download Sn0wBreeze 2.9.6 from here.

Our step-by-step tutorials for Sn0wBreeze 2.9.6 are available here:

Tutorials for jailbreak using Absinthe 2.0 are here.

You can find step-by-step instructions on how to jailbreak Apple TV 2G with Seas0nPass here (Windows, Mac OS).

sn0wbreeze 296 aooletv2g 500x397 Sn0wBreeze 2.9.6 released: added Apple TV 2G iOS 5.0.2 9B830 support

redsn0w 0912b1 325x400 RedSn0w 0.9.12b1 and PwnageTool 5.1.1 released: support iOS 5.1.1 untethered jailbreak redsn0w 0912b1 extras 325x400 RedSn0w 0.9.12b1 and PwnageTool 5.1.1 released: support iOS 5.1.1 untethered jailbreak

The iPhone Dev-Team has released updates to RedSn0w and PwnageTool that bring support for the iOS 5.1.1 untethered jailbreak.

RedSn0w 0.9.12b1 supports untethered iOS 5.1.1 jailbreak for all devices:

  • iPhone 3GS
  • iPhone 4
  • iPhone 4S
  • iPad 1
  • iPad 2
  • new iPad 3
  • iPod Touch 3G
  • iPod Touch 4G

PwnageTool 5.1.1 allows to create custom firmware and preserve modem version for unlock with ultrasn0w or Gevey. PwnageTool 5.1.1 supports all A4 devices:

  • iPhone 3GS
  • iPhone 4
  • iPad 1
  • iPod Touch 3G
  • iPod Touch 4G
  • Apple TV 2G

You can download RedSn0w 0.9.12b1 here and PwnageTool 5.1.1 here.

iOS 5.1.1 untethered jailbreak tutorial using Redsn0w is available here.

Official DevTeam comments:

RedSn0w
redsn0w allows owners of A4+earlier devices to install rocky-racoon two different ways:

  • backup/restore method similar to Absinthe and cinject
  • its traditional limera1n-based ramdisk install. If you have a lot of media on your A4 device (music, movies, TV shows, etc), then the ramdisk method is preferrred because it avoids any possibility of later problems related to syncing to iCloud (including Photo Stream and Music Match). The ramdisk method is not available for A5 devices or later because limera1n can’t be used. If you’d like to use redsn0w’s ramdisk method, just be sure to put the A4 device in DFU or Recovery mode before starting redsn0w (otherwise it will immediately start to use the backup/restore method).

We’ve also added a new redsn0w feature specifically for those who got in on the SAM unlock: you can now include your SAM tickets as part of your initial ramdisk jailbreak of iPhone4 or earlier, or alternatively you can upload your SAM tickets to any device after its been jailbroken. redsn0w accepts either the individual SAM activation ticket plist file, or the entire zip file created by redsn0w’s “Backup” button. As usual, redsn0w continues to cover all of its previous jailbreaks and untethers (so redsn0w-0.9.12b1 covers everything from 5.1.1 all the way back to 4.1).

PwnageTool
PwnageTool also avoids any possible sync issues, but again it applies only to A4+earlier devices. If you unlock your iPhone with ultrasn0w or a commercial method, you must use PwnageTool to avoid updating your baseband otherwise you’ll lose the unlock. PwnageTool will also jailbreak+untether the AppleTV2,1 5.0_2B206f (unless you customize the IPSW further, you’ll have just basic SSH access to the device).