The Chronic Dev-Team has released Greenpois0n for Windows which brings an untethered jailbreak to iOS 4.2.1 devices. You can jailbreak
You can download the latest version of GreenPois0n from
Update:
The Chronic Dev-Team has released Greenpois0n for Windows which brings an untethered jailbreak to iOS 4.2.1 devices. You can jailbreak
You can download the latest version of GreenPois0n from
Update:
These are step-by-step instructions on how to jailbreak iOS 4.2.1 on iPhone 3GS,
Greenpois0n has been updated to support the iOS 4.1 and iOS 4.2.1 firmware. Use Limera1n if you want to jailbreak iOS 4.0, iOS 4.0.1, iOS 4.0.2.
Remember: Greenpois0n recommends a clean restore before continuing.
Unlockers: do not update to iOS 4.1 or iOS 4.2.1 if you need the unlock. Ultrasn0w does not support that baseband yet. The only exception is the iPhone 4. Experienced users can also try update to iOS 4.2.1 without upgrading your baseband by using TinyUmbrella. Start TSS Server->Start iTunes->Plug in your iPhone->Restore 4.2.1->Error 1013->Put phone into DFU Mode->Launch Greenpois0n.
We are not authors of this app. We do not promise that everything will go well, use this tutorial at your own risk.
Step One
Open your web browser and download the latest Windows version of GreenPois0n from here.
Step Two
When prompted save the download to your desktop.
Step Three
Double click the downloaded gp_win_rc5_b2.zip file then drag the greenpois0n.exe file to the desktop. Double greenpois0n.exe from the desktop to launch the application
Step Four
Connect your iPhone to the computer, power it off. Then click the large Prepare to Jailbreak (DFU) button in greenpois0n app.
Step Five
You will now be instructed on how to place your iPhone into DFU mode.
You will be asked to press and hold the sleep button (power button) for 3 seconds.
Now continue holding sleep button and and press home for 10 seconds.
Release sleep button and continue holding the home button. Do not release the Home button at this point!.
Step Six
Once your iPhone is successfully in DFU mode you may click the Jailbreak button. You need to continue holding the home button.
Step Seven
Greenpois0n will now jailbreak your device.
Click the Quit button once the software application has completed. Now you can release the Home button.
You’ll notice some text scrolling on your device.
Step Eight
After the iPhone restarts you’ll see a new Loader application on your Springboard. Press to launch it.
Step Nine
Select Cydia then press the large Install Cydia button that appears. Now Cydia will be downloaded from internet, so you need internet connection through wi-fi or edge/3g.
Step Ten
Once Cydia has installed successfully you can remove Loader by pressing the Options button then the large red Remove Loader.app button.
Step Eleven
Restart your iPhone and run Cydia. Let it do all the necessary updates.
You’re done!
Update:To change the boot logo back to Apple: install “Apple Boot Logo” from Cydia, then go to Settings-BootLogo and select Apple Logo.
The Chronic Dev-Team has released Greenpois0n for Windows which brings an untethered jailbreak to iOS 4.2.1 devices. You can jailbreak
You can download the latest version of GreenPois0n from here.
Update: Step-By-Step tutorial
These are step-by-step instructions on how to jailbreak iOS 4.2.1 on iPhone 3GS,
Greenpois0n has been updated to support the iOS 4.1 and iOS 4.2.1 firmware. Use Limera1n if you want to jailbreak iOS 4.0, iOS 4.0.1, iOS 4.0.2.
Remember: Greenpois0n recommends a clean restore before continuing.
Unlockers: do not update to iOS 4.1 or iOS 4.2.1 if you need the unlock. Ultrasn0w does not support that baseband yet. The only exception is the iPhone 4. You can unlock iPhone 4 with iOS 4.1 using ultrasn0w. Experienced users can also try update to iOS 4.2.1 without upgrading your baseband by using TinyUmbrella. Start TSS Server->Start iTunes->Plug in your iPhone->Restore 4.2.1->Error 1013->Put phone into DFU Mode->Launch Greenpois0n.
We are not authors of this app. We do not promise that everything will go well, use this tutorial at your own risk.
These are step-by-step instructions on how to jailbreak iOS 4.2.1 on iPhone 3GS,
Greenpois0n has been updated to support the iOS 4.1 and iOS 4.2.1 firmware. Use Limera1n if you want to jailbreak iOS 4.0, iOS 4.0.1, iOS 4.0.2.
Remember: Greenpois0n recommends a clean restore before continuing.
Unlockers: do not update to iOS 4.1 or iOS 4.2.1 if you need the unlock. Ultrasn0w does not support that baseband yet. The only exception is the iPhone 4. Experienced users can also try update to iOS 4.2.1 without upgrading your baseband by using TinyUmbrella. Start TSS Server->Start iTunes->Plug in your iPhone->Restore 4.2.1->Error 1013->Put phone into DFU Mode->Launch Greenpois0n.
We are not authors of this app. We do not promise that everything will go well, use this tutorial at your own risk.
Step One
Open your web browser and download the latest Mac version of GreenPois0n from here.
Step Two
When prompted save the download to your desktop.
Step Three
Double click the downloaded greenpois0n-osx_rc5.zip file to extract the archive. Then double click greenpois0n icon from the desktop to launch the application.
Step Four
Connect your iPhone to the computer, power it off. Then click the large Jailbreak button in greenpois0n app.
Step Five
You will now be instructed on how to place your iPhone into DFU mode. You will be asked to press and hold the sleep button (power button) for 3 seconds.
Now continue holding sleep button and and press home for 10 seconds.
Release sleep button and continue holding the home button. Do not release the Home button at this point!.
Step Six
Once your iPhone is successfully in DFU mode the jailbreak will begin. You need to continue holding the home button.
Step Seven
Now once Greenpois0n informs you that it has completed the jailbreak you can release the Home button.
Click the Complete button to close the application.
You’ll notice some text scrolling on your device.
Step Eight
After the iPhone restarts you’ll see a new Loader application on your Springboard. Press to launch it.
Step Nine
Select Cydia then press the large Install Cydia button that appears. Now Cydia will be downloaded from internet, so you need internet connection through wi-fi or edge/3g.
Step Ten
Once Cydia has installed successfully you can remove Loader by pressing the Options button then the large red Remove Loader.app button.
Step Eleven
Restart your iPhone and run Cydia. Let it do all the necessary updates.
You’re done!
Update:To change the boot logo back to Apple: install “Apple Boot Logo” from Cydia, then go to Settings-BootLogo and select Apple Logo.
The Chronic Dev-Team has finally released the new version of Greenpois0n, which features a full untethered jailbreak for iOS 4.2.1. No SHSH blobs needed. The exploit used has already been patched in iOS 4.3, so it not work on future iOS 4.3.
You can jailbreak
There is only Mac OS X version available. Chronic Dev-Team will release Windows and probably Linux version soon.
Unlockers: do not update to stock iOS 4.2.1. You should keep your baseband version. Wait for new version of PwnageTool.
You can download GreenPois0n RC5 from here.
The iPhone Dev team has just released the second beta of their untethered RedSn0w jailbreak (the first beta has been released few hours ago and has more bugs).
New jailbreak is called “Jailbreak Monte”, as it uses new “backup method”. The iPhone Dev Team warns that their beta-version is not a general release and you should back up all your media before using it. There are also other limitations and bugs:
To use this version of jailbreak Cydia should have your 4.2b3 SHSH blobs saved on file and following:
“You must already have the usbmuxd software installed and running on your Mac (this requirement will eventually go away too). The correct invocation of the relay is just as that page says: “./tcprelay.py -t 22:2222”. If the relay isn’t installed or running correctly by the time the redsn0w ramdisk has started, you’ll need to restore to stock FW again to try it again. Please test it beforehand to save yourself some time!”
Now, if you’re ready to apply this version of jailbreak, upi can download redsn0w 0.9.7 beta here.
After downloading and applying just select “Jailbreak Monte” to try out the untether.
The iPhone Dev team asks to test it after a fresh restore in order to keep track of the variables involved. Be careful!
By the way, iPodUplink has posted a video where you can see how to jailbreak your device with the latest version of redsn0w:
MuscleNerd from iPhone DevTeam tweeted that an untethered jailbreak solution for iOS 4.2.1 will be released soon, probably next week.
scotty6kids78: @MuscleNerd are we any closer to the unteathered #jailbreak for the new #ios4.2 on #iphone4 ?
MuscleNerd: @scotty6kids78 it’ll be here by Xmas (not because we’re sitting waiting for Xmas, but because it’s achievable deadline)
This untethered solution will be applicable to all current iOS 4.2.1 devices, including
Next iPhone/iPod/iPad firmare iOS 4.2 is due out soon. What can we expect in terms of jailbreaking 4.2?
Limera1n exploit for 4.2 in most cases is a tethered jailbreak. That means if you have to reboot your device, it will show a “connect to itunes” logo until you run the jailbreak software again.
Tethered jailbreak isn’t that bad for iPads and iPods. But if something happens and your iphone reboots while you’re away from your computer, you cant use the device until you get home and run some tool on your computer again.
We suggest not updating until new expoit will be implemented in new utility.
The community is working on a solution to this to either make the jailbreak untethered or at least semi-tethered. Semi-tethered means the device will at least reboot, but unjailbroken while on the road until you return to your computer.
These are instructions on how to jailbreak your iPhone using PwnageTool 4.1 for Mac OS X. If you need unlock and you have not updated to iOS 4 you will be able to preserve baseband and unlock iPhone using ultrasn0w.
This guide will work for
Step One
Make a folder called “Pwnage” on the desktop. Now you need to download there PwnageTool 4.1 from here and iOS 4.1 firmware from here.
When downloading the IPSW file, it is best to download it with Firefox since Safari often auto extracts it!
Step Two
Double click to mount PwnageTool then drag the PwnageTool icon into the Pwnage folder.