Jailbreak iPhone, iPod Touch, iPad

Today Apple released patches for its iOS that address a security hole in Mobile Safari, which allowed users to jailbreak their iDevices. The PDF exploit they used also allowed hackers to gain remote control over the device with an iOS.

iOS 4.0.2 is available for:

• iPod touch 2G
• iPod touch 3G
• iPhone 3G
• iPhone 3GS
• iPhone 4.

Apple did NOT release the patch for the first generation iPhones.

iOS 3.2.2 is intended to use on the iPad and iPad 3G.

You can update your device via the links above or simply by connecting your device to iTunes and clicking Update. But note, if you want to continue using jailbreak you should not update your handset/tablet and don’t forget to backup your SHSH blobs.

Having problems activating your iPhone? Don’t have original SIM-card? Cannot get passed emergency unlock screen? We have a solution:

If you have iPhone 3G, just use redsn0w to jailbreak and hactivate. If you have iPhone 3GS or iPhone 4 follow these instructions:

If you are already Jailbroken:

So you have an iPhone with iOS 4.0, but don’t have the original SIM and stuck on the Emergency Call Screen:

1. Download ifunbox software (download link)
2. Run ifunbox software and sync with phone
3. Go to /private/var/root/Library/, delete original lockdown folder and put this lockdown folder after you extract it from the zip file
4. Restart phone

If you are not jailbroken

Sherif Hashim discovered that you can activate your iPhone 4, iPhone 3GS or even iPhone 3G without the original carrier SIM card. You need a “phonebook sim card” or 02 simcard. You can buy these type of sim at radioshack, bestbuy or other mobile electronics store (for example here).

Once you get passed the Emergency Call screen, connect to Wifi, jailbreak using JailbreakMe.com and unlock using ultrasn0w. Once that is complete you should be passed activation and unlocked (able to use any sim). If you get a different simcard error, do the following final step:

1. Download ifunbox software (download link)
2. Run ifunbox software and sync with phone
3. Go to /private/var/root/Library/, delete original lockdown folder and put this lockdown folder after you extract it from the zip file
4. Restart phone

If you have itunes invalid response problem:

1. Connect to wifi and ssh to your phone (via winscp, putty, terminal, etc).
2. Navigate to your lockdown folder (/private/var/root/Library/).
3. Delete pair_records folder
4. Reconnect the cable and see that your invalid response problem is gone.

If you bought your iPhone 4 on ebay you will need the official sim (at&t) or a universal sim, like ones you can grab at bestbuy for $10 this will get you passed Emergency Screen.

via jailbreakmatrix and gsmhosting

Here is a small comment from MuscleNerd about the upcoming iOS 4 jailbreak:

the next jailbreak from @comex is like first Spirit..all devices, all bootroms, latest FW, painless install

Sounds nice!

MuscleNerd, famous hacker from DevTeam, has announced via Twitter that an upcoming comex release will jailbreak all 4.0 devices. This will include latest iPhone 3GS, iPhone 4, new iPod Touch and iPad.

jailbreak for all devices at 4.0 is already handled by upcoming @comex release so, good time for iphone4 unlock stuff

Comex is also well-known, he authored the 3.1.2 and 3.1.3 jailbreak called Spirit. He’s also recently demonstrated Frash, an upcoming release of Flash for the iPhone and iPad.

iH8Sn0w has successfully performed a tethered jailbreak for iPhone 3GS with new firmware  iOS 4 and the new bootrom. Unfortunately this jailbreak requires users to have 3.1.2 SHSH blobs saved.

Alright… If anyone has their 3.1.2 SHSH blobs, NOT 3.1.3. Then I’ll see if I can produce a tool that will do this job…

Here is a video demo posted by AKinGdom1:

The utility will be available soon. Might be as soon as tomorrow.

DevTeam released update to their PwnageTool jailbreak utility. New version 4.01 supports iOS 4 jailbreak for iPhone 3GS (old bootrom), iPhone 3G and iPod Touch 2G (non-MC).

You can download the latest version here.

We recommend to read DevTeam instructions here before you start.

Hacker msftguy created unofficial PwnageTool which allows to upgrade to the pre-release of iOS 4.0 GM while keeping your jailbreak and old baseband.

This is not an official release by Devteam, so we recommend to wait for the final versions of both iOS 4.0 and PwnageTool.

For the advanced users who want to experiment here is a link.

Msftguy also provided a video:

Finally the jailbreak for iPad, iPhone and iPod Touch from the Dev Team is available for download. It’s free and untethered and it’s called “Spirit”. The jailbreak supports every iDevice with firmware version 3.1.2, 3.1.3 or 3.2.

If you have iPhone 3GS or an iPad you should backup your SHSH blobs before using the jailbreak. ECID SHSH or SHSH blob is a unique signature given to every Apple mobile device. When you decide to restore the firmware on your iPhone, iPod Touch or iPad, Apple servers checks this signature.

As you know, if a new firmware is released it becomes impossible to restore the older firmware from iTunes. But Cydia creator tuned up a new server and now it mimics Apple’s verification server and saves your older SHSH blobs so that you can restore back your device to the older firmware. Without having your SHSH blobs saved you may accidentally update new firmware and then you not only lose your jailbreak but also won’t be able to restore the older firmware to re-jailbreak your device.

This is also important because there is a big possibility that Apple will soon find out what exploit is used by the jailbreak and then it will be patched in the form of new firmware.

You can save your SHSH blob in three ways. Here is a guide to make it using AutoSHSH.

1. Download AutoSHSH. (Latest version is here).



2. Start AutoSHSH and plug in you iPhone/iPod Touch/iPad in recovery mode (only one device at a time). Recovery mode launches when you turn off your device and hold down the “Home” button when connecting the USB cable. Then you must see “Connect to iTunes” message and logo on your device.



3. In AutoSHSH click on “Grab my SHSH Blobs Automatically”. When the app will grab the signature you must choose whether you want to save it locally or not. Do not forget where you saved the signature. In the end of the procedure AutoSHSH will also upload it to saurik’s server.

If you have some problems with using AutoSHSH to save your blobs, write it in comments or try saurik’s method or Firmware Umbrella instead.

Now, when you saved you SHSH blobs, you can make the jailbreak. It is recommended for you to sync your device with iTunes beforehand. Then use the following guide:

1. Download “Spirit” (link for Windows, link for Mac OS X).
2. Plug in your device (it will be instantly recognized).
3. Hit the “Jailbreak” button.

That’s all!

Additionally here is a video tutorial for jailbreaking:

Please note that Spirit is not a carrier unlock so it won’t allow you to use unauthorized wireless carriers. The jailbreak is also “sort of beta”, so it may be buggy. DevTeam notifies that some apps in Cydia that are NOT designed for iPad may crash your system and require you to restore so be careful.

Wow! Hours after iPad 3G sales launch and it has already been jailbroken! Below is a video of MuscleNerd where jailbroken iPad 3G runs Cydia.

MuscleNerd used the jailbreak called “Spirit”. It’s a tool that makes untethered unlock of iPad, iPod Touch 3G and iPhone 3GS and DevTeam promises it will be available soon. Stay tuned for further instructions how to save your SHSH Blobs and then use Spirit to jailbreak your device.

A few hours ago iH8sn0w posted a tweet that he is able to run jailbreak on the new firmware 4.0 beta 1. DarkMalloc, another developer who worked on the project, has just released new video that shows firmware 4.0 jailbreak on iPhone 3G:

The interesting thing, besides the presence of Cydia and MobileTerminal, is the possibility to have multiple applications open at once. That means that multitasking on iPhone 3G can be enabled. Officially Apple doesn’t want to activate this functionality on iPhone 3G, just iPhone 3GS and later devices.